If you want to make a different driving experience, you don’t have to replace your car. To get that, you can easily replace your factory radio with a new multifunctional 2002-2005 Mercedes Benz Vaneo radio. To help you install your new head unit, you can read this article carefully, it’s a step-by-step Mercedes Benz Vaneo radio installation guide from Seicane. Wish you can get some help.

2002-2005 Mercedes Benz Vaneo radio after installion

2002-2005 Mercedes Benz Vaneo radio after installion

 

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

 

 

2002-2005 Mercedes Benz Vaneo radio installation guide

1. The picture of the original CD player and 6-disc CD player.

1. The picture of the original CD player and 6-disc CD player

1. The picture of the original CD player and 6-disc CD player

 

2. First detach the gear shift panel.

2. First detach the gear shift panel.

2. First detach the gear shift panel.

 

3. Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray.

3. Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray.

3. Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray.

 

4. Remove the car charger and ashtray assembly.

4. Remove the car charger and ashtray assembly.

4. Remove the car charger and ashtray assembly.

 

5. Use a screw driver to remove the screw marked with a red circle.

5. Use a screw driver to remove the screw marked with a red circle.

5. Use a screw driver to remove the screw marked with a red circle.

 

6. Pry the air conditioner panel out with a plastic lever.

6. Pry the air conditioner panel out with a plastic lever.

6. Pry the air conditioner panel out with a plastic lever.

 

7. Remove the original air conditioner panel.

7. Remove the original air conditioner panel.

7. Remove the original air conditioner panel.

 

8. Remove the heated seat and control panel assembly.

8. Remove the heated seat and control panel assembly.

8. Remove the heated seat and control panel assembly.

 

9. Pay attention to this buckle.

9. Pay attention to this buckle.

9. Pay attention to this buckle.

 

10. Remove two screws.

10. Remove two screws.

10. Remove two screws.

 

11. Pull out the original CD player.

11. Pull out the original CD player.

11. Pull out the original CD player.

 

12. Please be careful not to stretch the wiring harness behind the assembly.

12. Please be careful not to stretch the wiring harness behind the assembly.

12. Please be careful not to stretch the wiring harness behind the assembly.

 

13. The wiring diagram as follows. Put the plug of the car in the socket of the unit.

13. The wiring diagram as follows. Put the plug of the car in the socket of the unit.

13. The wiring diagram as follows. Put the plug of the car in the socket of the unit.

 

14. The wiring diagram.

14. The wiring diagram.

14. The wiring diagram.

 

15. The wiring diagram.

15. The wiring diagram.

15. The wiring diagram.

 

16. Radio antenna lead.

16. Radio antenna lead.

16. Radio antenna lead.

 

17. Install the new Seicane radio back after the wiring harness has bee connected. Fasten the four screws.

17. Install the new Seicane radio back after the wiring harness has bee connected. Fasten the four screws.

17. Install the new Seicane radio back after the wiring harness has bee connected. Fasten the four screws.

 

18. Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back.

18. Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back.

18. Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back.

 

19. Reinstall cigarette lighter.

19. Reinstall cigarette lighter.

19. Reinstall cigarette lighter.

 

20. Turn on the new Seicane radio and have a careful check if everything works well.

 

 

 

In a word, wish you can get help from the above installation guide. If there is question, please ask your dealer or a professional for help. If you find it too hard to understand all the steps, you can go to a car upgrade center or have your new radio installed by a professional.

 

Do you have an ideal new radio for your car? If not, you can refer to this wonderful Mercedes Benz Vaneo radio from Seicane, it comes with an attractive interface for you to upgrade your factory radio, please click for more details:

 

http://www.seicane.com/oem-dvd-player-gps-navigation-system-for-2002-2005-mercedes-benz-vaneo-with-radio-bluetooth-1080p-video-rearview-camera-tv-tuner-dvr-usb-sd-canbus-s127507d

 

With this Mercedes Benz Vaneo radio in your car, you can enjoy your favorite videos on its 7 inch digital LED touch screen with visually radiant display. The worldwide real-time GPS makes it easier for you to get to your destination within the least time. To sync with your enabled mobile phone, you can make and receive hands-free calls and stream music to keep safe and pleasant in the whole driving.

 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation