To replace a factory radio with a new aftermarket one, you can not only easily get a newer car interior environment but also a brand new driving experience. Some car owners may worry about it’s too hard to install a new aftermarket radio. As a matter of fact, with a correct installation guide and some related installation experience, you can also finish the installation easily on your own. Here I’d like to share a step-by-step 2004 2005 2006 Mercedes Benz Viano Vito car stereo installation guide from Seicane with you. Wish it can be helpful for you!

2004 2005 2006 Mercedes Benz Viano Vito car stereo after installation

2004 2005 2006 Mercedes Benz Viano Vito car stereo after installation

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2004 2005 2006 Mercedes Benz Viano Vito car stereo installation guide

1.The original car radio.

The original car radio

The original car radio

2.Remove your shifter boot.

Remove your shifter boot

Remove your shifter boot

3.Remove the panel.

Remove the panel

Remove the panel

4.Release the plastic tabs, then remove two screws behind the plastic cover.

Release the plastic tabs, then remove two screws behind the plastic cover

Release the plastic tabs, then remove two screws behind the plastic cover

5.Remove the bottom plastic part.

Remove the bottom plastic part

Remove the bottom plastic part

6.Unscrew the screw holding the plastic panel.

Unscrew the screw holding the plastic panel

Unscrew the screw holding the plastic panel

7.Remove the plastic panel.

Remove the plastic panel

Remove the plastic panel

8.Remove the screw at the bottom plastic panel.

Remove the screw at the bottom plastic panel

Remove the screw at the bottom plastic panel

9.Unscrew the screw holding the bottom plastic panel.

Unscrew the screw holding the bottom plastic panel

Unscrew the screw holding the bottom plastic panel

10.Remove the bottom plastic panel.

Remove the bottom plastic panel

Remove the bottom plastic panel

11.Turn the vent panel up.

Turn the vent panel up

Turn the vent panel up

12.Remove the screws holding the vent panel.

Remove the screws holding the vent panel

Remove the screws holding the vent panel

13.Take the vent panel out of the dashboard.

Take the vent panel out of the dashboard

Take the vent panel out of the dashboard

14.Remove the panel covering the car original radio.

Remove the panel covering the car original radio

Remove the panel covering the car original radio

15.Disconnect the connectors at the back of the panel.

Disconnect the connectors at the back of the panel

Disconnect the connectors at the back of the panel

16.Remove the screws holding the original car radio.

Remove the screws holding the original car radio

Remove the screws holding the original car radio

17.Gently take the original car radio out of the dashboard.

Gently take the original car radio out of the dashboard

Gently take the original car radio out of the dashboard

18.Disconnect the connectors at the back of the original car radio.

Disconnect the connectors at the back of the original car radio

Disconnect the connectors at the back of the original car radio

19.Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

20.Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

21.Connect the Seicane car stereo to your original car radio ‘s plugs.

22.Put the new Seicane car stereo into the dash. Then turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

23.Put everything into their original place.

 

Wish the above installation guide for the Mercedes Benz Viano Vito car stereo can be helpful for you. If you have any question, you can consult your dealer or a professional. If it’s the first time for you to upgrade your factory radio, then you’d better have it installed by a professional. Please make sure you are clear about every step before you start to install it.

Besides, if you don’t have a suitable car stereo for your car, I’d like to recommend an intelligent 2004 2005 2006 Mercedes Benz Viano Vito car stereo from Seicane to you. It comes with the latest configurations and amazing user interface for you to upgrade your factory radio. For more details, you are welcome to click:

http://www.seicane.com/seicane-s127507-double-din-android-bluetooth-dvd-in-dash-gps-stereo-for-2004-2005-2006-mercedes-benz-viano-vito-with-flash-3g-wifi-radio-tuner-mirror-link-obd2-hd-1024-600-multi-touch-screen-cpu-s127507

Loaded with a powerful RK3188 1.6 GHz Cortex A9 Quad-core CPU, this hot selling 2004 2005 2006 Mercedes Benz Viano Vito car stereo has a better and smoother performance than ever. The built in wifi enables you to freely surf the internet for online information as long as you can connect with a wifi hotspot. Simply link with your enabled mobile phone, you can make and receive phone calls without taking your hands off the steering wheel and stream music to keep safe and enjoyable. The accurate text-to-speech guidance provided by the GPS navigation system can lead you to anywhere you’d like. Just take it and go right now!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation