You must want every part in your car is of high performance so that you can have a perfect in-car life. However, some car owners may discover that a factory radio comes with few features, which can’t meet most of needs. In that case, to replace the factory radio with a new aftermarket radio is the best idea. If you are fed up with your factory radio, you can also achieve the new radio installation by yourself. Here comes a detailed 2006-2009 Ford Fusion 4-door Sedan car radio installation guide for your reference.
2006-2009 Ford Fusion 4-door Sedan stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2006-2009 Ford Fusion 4-door Sedan radio installation steps
Step 1: Remove the trim around gear shifter.
Remove the trim around gear shifter
Step 2: Remove screws securing center console lid with a screwdriver.
Remove screws securing center console lid with a screwdriver
Step 3: Remove the center console trim.
Remove the center console trim
Step 4: Remove console side panels on both driver and passenger sides.
Remove console side panels on both driver and passenger sides
Step 5: Remove bolts securing radio bezel and AC controls.
Remove bolts securing radio bezel and AC controls
Step 6: Unplug AC controls (from passenger side).
Unplug AC controls (from passenger side)
Step 7: Remove the radio bezel and AC controls.
Remove the radio bezel and AC controls
Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.
Remove screws securing radio to the vehicle, and take the original radio out of the dash
Step 9: Check all the accessories for the new Seicane radio.
Check all the accessories for the new Seicane radio
Step 10: Connect the harnesses to the back of the new Seicane radio.
Connect the harnesses to the back of the new Seicane radio
Step 11: Connect the Seicane radio to your original car radio’s plugs, and put the new Seicane radio into the dash.
Step 12: Turn on the new Seicane radio and check whether the radio is working properly.
Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.
Wish the above installation guide can be helpful for you to upgrade your factory radio. It is quite normal if you encounter any problems during the installation process. To solve problems, you can turn to your dealer or a professional for help. Besides, if you haven’t chosen a suitable car radio yet, I’d like to share the following link with you which is an amazing 2006-2009 Ford Fusion 4-door Sedan car radio from Seicane.
This Seicane 2006-2009 Ford Fusion 4-door Sedan car radio comes with higher configurations and performance for you to upgrade your factory radio, which include a stable Android 5.1.1 operation system, a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor and a 16 GB INand Flash. This unit is equipped with the worldwide real-time GPS navigation system in high precision.
It provides you with 3D street view, landmark building display, turn-by-turn directions, voice prompts, etc, which enables you to find your ways to your destinations. What’s more, you can utilize its built-in Bluetooth module to wirelessly pair with your enabled mobile phone to make, receive or reject hands-free calls as well as stream audio to keep you safe and enjoyable.
Just add it to your cart and enjoy your driving from now on!
Recent Comments