To get to your desired destination, you can easily open a 3D GPS navigation system to get access to the landmark display, intelligent 3D street view, turn-by-turn direction and voice prompts. Besides, if you want to enjoy your favorite music on the way, a multifunctional car stereo is your best choice. To help you better install your new stereo, here I’d like to share a detailed 2006-2011 VW Volkswagen EOS car stereo installation guide from Seicane with you.
2006-2011 VW Volkswagen EOS car stereo after installation
Precautions:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
- For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006-2011 VW Volkswagen EOS car stereo installation guide
Step 1: Remove the trim panel.
Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your one hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.
Remove the trim panel
Step 2: Remove the four screws on the radio.
Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new head unit.
Remove the four screws on the radio
Step 3: Take the factory radio out of the dash.
After the four screws are unscrewed, you can easily pull the factory out of the dash.
Take the factory radio out of the dash
Step 4: Disconnect the wiring harness.
Before you put the factory radio aside, please disconnect the wiring harness at the back of the factory radio.
Disconnect the wiring harness
Step 5.Check all the accessories for the new Seicane car stereo.
Step 6. Connect the harnesses to the back of the new Seicane car stereo.
Step 7. Connect the Seicane car stereo to your original car radio ‘s plugs.
Step 8: Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Step 9: Put the new Seicane stereo into the dash and install the four screws.
Step 10: Install the trim panel into its original place.
All in all, you need to make clear about every step before you start to install this 2006-2011 VW Volkswagen EOS car stereo in your car. If there is any question, you can consult your dealer. If it’s the first time for you to replace a new car stereo, you’d better ask a professional for help.
Do you find an ideal car stereo for your car? If not, you can take this amazing 2006-2011 VW Volkswagen EOS car stereo from Seicane into consideration. It’s an ideal stereo with high configurations for you to upgrade your factory radio. For more details, you are welcome to click:
This intelligent VW Volkswagen EOS car stereo comes with a large 7 inch touch screen to ease the operation is ideal for you to replace your factory radio. It can keep your steering wheel control still working after installation. With the high performance and smoother operation due to the upgraded software and improved firmware, you can enjoy a brand new driving experience from now on. Good luck!
Recent Comments