To get to a lot of locations without getting lost and with ease, a powerful car stereo integrated with GPS navigation function and entertainment features can easily help you with that. No matter you are going to upgrade some features in your factory radio or just totally replace it, a detailed removal and installation guide can be helpful for you. The following instruction is about a 2007-2015 Toyota ALPHARD car stereo from Seicane, if you have the same dashboard, you can also take it as a reference.
2007-2015 Toyota ALPHARD car stereo after installation
Some tips before the installation:
- Please disconnect the power before the installation.
- Please prepare a lever and a screwdriver before the removal and the installation.
- Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
2007-2015 Toyota ALPHARD car stereo installation guide
1·Remove the original console panel with a plastic knife, pry gently along the gap and pick up the panel. Then set it aside.
2007-2015 Toyota ALPHARD car stereo installation step 1
2·Remove the four screws that fixed the radio on the dashboard. Remove these screws will not be a difficult job.
2007-2015 Toyota ALPHARD car stereo installation step 2
3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
2007-2015 Toyota ALPHARD car stereo installation step 3
4·Unplug the connectors.
2007-2015 Toyota ALPHARD car stereo installation step 4
5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move to the installation of the Seicane car stereo.
2007-2015 Toyota ALPHARD car stereo installation step 5
6·Install the brackets on both sides of the Seicane car stereo.
7·Dock the connectors of the original vehicle and the upgraded car audio.
2007-2015 Toyota ALPHARD car stereo installation step 7
8·Insert the wires to the appropriate location of the upgraded car stereo. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.
9·Fix the Seicane car stereo with the four screws.
2007-2015 Toyota ALPHARD car stereo installation step 9
10·Firm the console panel. Finally the new Seicane stereo is installed and a comprehensive test should be conducted on the new radio.
2007-2015 Toyota ALPHARD car stereo installation step 10
If you have any questions about the removal and installation, you can ask your dealer or a professional for help. Wish the above installation guide can be helpful for you. If you are a green hand on the installation, please go to a car stereo upgrade center to install it.
In addition, it’ s necessary for you to ensure your new stereo can be suitable for your car. If you are still looking for an ideal stereo for your car, you can refer to the following link which is an amazing 2007-2015 Toyota ALPHARD car stereo from Seicane, please click:
With this Toyota ALPHARD car stereo in your car, you can enjoy the Bluetooth music streaming at the same time to keep relaxed during the driving. You won’t have any trouble in finding your way to your destination any more with the help of the text-to-speech guidance provided by its 3D precise GPS navigation system.
Just take this popular Toyota ALPHARD car stereo in your car and have a wonderful trip with it! Good luck to you!
Recent Comments