The most up-to-date head unit will make your driving become easier and comfortable. You can reach the destination by the shortest route between two locations with the 3D GPS navigation system. You can make hands-free calls and music streaming with the newest Bluetooth function. A lot of application can be downloaded in the Android Market with the stable android system. If you are worry about the installation, I’d like to teach you how to skillfully replace a 2006 2007 Mitsubishi Raider head unit from Seicane. You can take it as reference and hope it can help you.
2006 2007 Mitsubishi Raider after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 Mitsubishi Raider head unit installation guide
1.Loosen the trim panel with a lever.
Loosen the trim panel with a lever
2. Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car
2-2
3. Use a screw driver to remove the four screws.
Use a screw driver to remove the four screws
4. Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit
4-2
5. Check all the accessories for the new Seicane head unit.
Check all the accessories for the new Seicane head unit
6. Connect the new Seicane radio to the original wiring harness as the user manual or the wiring diagram shows.
Connect the new Seicane radio to the original wiring harness as the user manual or the wiring diagram shows
7. Put the new unit into the dash, turn on the new unit and have a test if the new Seicane stereo is working without problem.
8. Put trim panel back on your new Seicane stereo after the normal test.
That’s all the installation guide of the 2006 2007 Mitsubishi Raider head unit and hope it will help you to know more about the head unit. If you don’t have any experience on the installation, it suggest you go to the dealer or professionals to ask for help. Beyond that, the first thing for you to do is find the suitable head unit to install in your car. I have this unit to introduce to you: 2006 2007 Mitsubishi Raider head unit from Seicane.
This unique Mitsubishi Raider head unit comes with the most up-to-date android 4.4.4 with fast response and a stable system, support high-definition screen and LVDS input, built in WIFI, 3D GPS Navigation System and so on. You can just insert the SD card to upgrade system, interface, MCU, Bluetooth, Canbus program and etc without no other equipment. To upgrade your car interior and to enjoy a new and different journey, the product is just the right choice!
Recent Comments