Nowadays the installation process or a new car radio is not complicated since most car radios are plug and play. Therefore, you don’t have to over worry about the installation. And you can also try to finish the whole installation process if you have installed a car radio before and have a correct installation guide. The following is a 2006 2007 2008 2009 2010-2013 Audi TT car radio installation instruction from Seicane. If you have the same or the same dashboard, you might as well take this instruction as a reference.
2006 2007 2008 2009 2010-2013 Audi TT Car Radio after installation
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 2010-2013 Audi TT car radio installation instruction
1. The original car radio.
The original car radio
2. Prepare four removal keys.
Prepare four removal keys
3. There are four removal slots in the radio. Insert the removal keys into the holes of the radio.
There are four removal slots in the radio. Insert the removal keys into the holes of the radio
4. Pull outwards to release the radio.
Pull outwards to release the radio
5. Remove the removal keys in the radio.
6. Unplug connectors and cables at the back of the radio.
Unplug connectors and cables at the back of the radio
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original radio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
To successfully solve the problems you meet in the installation, please feel free to consult your dealer for advice or ask for help from a professional. To avoid damage to both your car radio and your car, you’d better go to a car radio upgrade center to install your new car radio. Besides, it is very crucial for you to select an ideal car radio for your beloved car. If you don’t have ideas, here I would like to share a great 2006 2007 2008 2009 2010-2013 Audi TT car radio from Seicane with you. You may click the link below for more information.
This car radio adopts the latest and stable Android 7.1 operation system and a powerful quad-core CPU processor to enhance its capabilities and performance. So you will embrace a much smoother and easier operation experience.
This unit comes with a wide range of comprehensive features which can meet almost all your needs in car. These features can further help you gain great convenience and joyfulness so as to enrich your driving experience.
Even you have no good sense of directions, you can easily locate where you are and navigate to your desired destinations through the turn-by-turn directions and voice prompts. And with dual zone function, this unit enables you to freely enjoy beautiful music while navigating.
Through the Bluetooth connection between your Bluetooth-enabled mobile phone with this car radio, you can freely make, receive, reject and mute hands-free calls as well as listen to Bluetooth streaming music, which can bring you both convenience and enjoyment.
Wish you like this unit and good luck to you!
Recent Comments