How hard is it to upgrade your factory radio by installing a brand new car radio? Some car owners who want to enjoy more convenience and enjoyment in car may want to know the answer? As a matter of fact, it is not too complicated to install a new car radio under the guidance of a correct installation instruction if you have some related installation experience. If you are a car owner of a 1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i, you can carefully refer to the following 1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car radio installation instruction from Seicane.
1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Radio after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car radio installation instruction
1. The original car radio.
The original car radio
2. Remove the surrounding trim panel with a plastic removal tool.
Remove the surrounding trim panel with a plastic removal tool
2-1
2-2
3. Remove two screws fixed the radio on the dashboard.
Remove two screws fixed the radio on the dashboard
3-1
4. Gently pull out the original car radio.
Gently pull out the original car radio
5. Unplug the connectors and cables at the back of the radio.
Unplug the connectors and cables at the back of the radio
6. Remove the A/C control and unplug the connectors.
Remove the A/C control and unplug the connectors
6-1
7. Remove two screws holding the heat vent.
Remove two screws holding the heat vent
8. Remove screws so as to remove radio frame.
Remove screws so as to remove radio frame
9. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
10. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
11. Connect the Seicane car radio to your original radio’s plugs.
12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
13. Put the new Seicane car radio into the dash.
14. Put everything into their original place. All the installation is done.
Wish the above installation instruction is helpful for you. If you encounter any difficulties and don’t know how to overcome them, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Anyway, first of all, you have to purchase a compatible car radio. If you have no ideas, you can check out the following link which is a great 1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Radio from Seicane.
This car radio based on the most stable Android 6.0 operation system, and 8 – Core 1.5 GHz RK-PX5 A53 processor to enhance its capacities and performance to be the best replacement for your factory radio.
With this car radio installed in your car, you can get access to the high-end 3D GPS navigation system. With the assistance of the worldwide real-time GPS function, you can locate where you are and find the most suitable way to arrive at your destinations according to turn-by-turn directions and voice prompts. And because of this unit’s dual zone function, you can freely enjoy beautiful music while navigating.
Besides, without keeping your hands off the steering wheel, Bluetooth hands-free calls and streaming music are both supported by this unit if you connect your Bluetooth-enabled mobile phone with this unit under the wireless Bluetooth technology.
Don’t hesitate to add this unit to your shopping cart. Good luck to you!
Recent Comments