As technology improves, the precision of a GPS navigation has become great. Therefore, almost all the car owners try to install a GPS navigation system in a car. However, some of the factory radio can’t support GPS function. In that case, it’s wise of you to replace your factory radio with a brand new aftermarket head unit. To install a new head unit, you can find a step-by-step installation guide. Wish the following 1999 2000 2001-2004 Jeep Grand Cherokee head unit installation instruction from Seicane can be much helpful for you.
1999 2000 2001-2004 Jeep Grand Cherokee head unit after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
1999 2000 2001-2004 Jeep Grand Cherokee head unit installation steps
1.Remove the trim piece above cup holder with a lever.
Remove the trim piece above cup holder with a lever
2.Remove 2 screws behind the trim piece.
Remove 2 screws behind the trim piece
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
Gently pry around the side of trim panel with the lever and then remove the trim panel
4.Remove 4 screws which holds the factory radio in place.
Remove 4 screws which holds the factory radio in place
5.Take out the original radio.
Take out the factory radio
6.Disconnect the smaller harness on the behind of the original car radio.
Disconnect the smaller harness on the behind of the factory radio
7. Check all the accessories for the new Seicane head unit.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane head unit.
Connect the harnesses to the back of the new Seicane car radio
9.Connect the Seicane head unit to your original car radio ‘s plugs.
10.Install four screws and trim panel.
11.Install 2 screws behind the trim piece and the trim piece.
12.Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
The step-by-step installation guide for a 1999 2000 2001-2004 Jeep Grand Cherokee head unit is shown as the above. Wish you can get some help from it. If there is any question, you can consult your dealer. However, if you can’t finish it on your own, you’d better ask a professional for help. If you are still looking for an ideal car stereo for your car, you can refer to this amazing Jeep Grand Cherokee head unit from Seicane. Please click for more details:
With this Jeep Grand Cherokee head unit in your car, you can also choose your favorite radio station for global news and instant traffic information with the FM/AM radio. Your steering wheel control can still work after installation. The availability of USB and SD card makes it possible for you to play compatible external devices for more entertainment. Wish you have a great time with it on all trips!
Recent Comments