If you are not satisfied with your factory radio due to its simple and old features, you can upgrade this basic stock stereo so as to add the latest features such as GPS function, Bluetooth, USB/ SD connection, etc. If you are an owner of a 2003-2006 Jeep Wrangler , here I would like to recommend a 2003-2006 Jeep Wrangler car stereo from Seicane to you. It is easy to install and use as well as integrates a wide range of modern features. The following is a step-by-step installation instruction for a 2003-2006 Jeep Wrangler Sound System, which can be taken as your reference.
2003-2006 Jeep Wrangler Sound System after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.Please prepare a lever and a screwdriver before the removal and the installation.
5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2003-2006 Jeep Wrangler car stereo installation instruction
1. Remove the trim piece above cup holder with a lever.
Remove the trim piece above cup holder with a lever
2. Remove 2 screws behind the trim piece.
Remove 2 screws behind the trim piece
3. Gently pry around the side of trim panel with the lever and then remove the trim panel.
Gently pry around the side of trim panel with the lever and then remove the trim panel
4. Remove 4 screws which hold the factory radio in place.
Remove 4 screws which hold the factory radio in place
5. Take out the factory radio.
Take out the factory radio
6. Disconnect the smaller harness on the behind of the factory radio.
Disconnect the smaller harness on the behind of the factory radio
7. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
8. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
9. Connect the Seicane car stereo to your original car radio’s plugs.
10. Install four screws and trim panel.
11. Install 2 screws behind the trim piece and the trim piece.
12. Turn on the new stereo and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Above is the whole removal and installation process for a 2003-2006 Jeep Wrangler Sound System. If you have any difficulties understanding the above steps, please feel free to communicate with a professional technician or ask an experienced person for help. To purchase the amazing 2003-2006 Jeep Wrangler Sound System from Seicane I recommend to you, please check out the following link:
With this unit in your car, your different needs can be met since it is coming with a variety of features including GPS function, Bluetooth hands-free calls, Bluetooth music, FM/AM radio, CD/DVD player, USB/SD connection, etc.
As for its practical features, firstly I’d like to take the 3D GPS navigation as an example. The turn-by-turn directions and voice prompts provided by the 3D navigation will accurately guide you to any unfamiliar directions even you are not good at identifying directions.
While as for the optional features, you can add Car DVR, Backup camera, OBD2, etc to this unit according to your preference and needs. For instance, a backup camera can be used for automatically switching to the parking image while reversing, which is very helpful for your parking.
Don’t hesitate to add this 2003-2006 Jeep Wrangler Sound System to your cart and wish you enjoy your driving from now on!
Recent Comments