For a 2003 2004 2005 2006 Jeep Wrangler, if it doesn’t come with factory navigation system, then you can replace your factory radio with an aftermarket in-dash 2003 2004 2005 2006 Jeep Wrangler car stereo with features like Bluetooth hands-free calls, Bluetooth music, DVD player, USB/ SD connection and the most important feature – GPS navigation system. Detailed installation steps for a 2003 2004 2005 2006 Jeep Wrangler car stereo are as follows. If you have installed a car stereo before, you can take it as a reference.
2003-2006 Jeep Wrangler car radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2003 2004 2005 2006 Jeep Wrangler car stereo installation instruction
1. Remove the trim piece above cup holder with a lever.
Remove the trim piece above cup holder with a lever
2. Remove 2 screws behind the trim piece.
Remove 2 screws behind the trim piece
3. Gently pry around the side of trim panel with the lever and then remove the trim panel.
Gently pry around the side of trim panel with the lever and then remove the trim panel
4. Remove 4 screws which hold the factory radio in place.
Remove 4 screws which hold the factory radio in place
5. Take out the factory radio.
Take out the factory radio
6. Disconnect the smaller harness on the behind of the factory radio.
Disconnect the smaller harness on the behind of the factory radio
7. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
8. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
9. Connect the Seicane car stereo to your original car radio’s plugs.
10. Install four screws and trim panel.
11. Install 2 screws behind the trim piece and the trim piece.
12. Turn on the new stereo and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Now can you succeed in the whole installation process of a 2003 2004 2005 2006 Jeep Wrangler car stereo? If you meet any troubles, please feel free to communicate with your dealer or a professional for seeking their help. Besides, if you are still searching for an ideal stereo for your car, I would like to recommend a remarkable 2003 2004 2005 2006 Jeep Wrangler car stereo from Seicane to you as reference. For more details, please click:
This remarkable 2003 2004 2005 2006 Jeep Wrangler car stereo from Seicane, based on the intelligent Android 4.4.4 operation system and a high-quality RK PX3 1.66GMHZ Quad-core processor, can undoubtedly be the best replacement for your factory radio. If you get it installed in your car, you can take full advantage of its practical and entertainment features to enrich your in-car life. You won’t get lost because of the turn-by-turn directions and voice prompts offered by its powerful 3D GPS navigation system. And the additional entertainment features can add much more fun to your long and tiresome journey. What are you waiting for? If you like this car stereo, don’t hesitate to add it to your cart.
Recent Comments