If you are going to upgrade your factory radio, you can find a detailed installation guide to help you. Related installation videos or guides can both be helpful. If you own a 2003-2009 KIA CERATO and have the same dashboard, you can take this Seicane 2003-2009 KIA CERATO head unit installation instruction as a reference.
2003-2009 KIA CERATO head unit after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2003-2009 KIA CERATO head unit installation guide
1. The original car radio.
The original car radio
2. Pry around the edges of the panel with a lever, and then remove the panel with your hands.
Pry around the edges of the panel with a lever, and then remove the panel with your hands
3. Disconnect all the connectors at the back of the panel.
Disconnect all the connectors at the back of the panel
4. Unscrew four screws holding the original radio in place with a screwdriver.
Unscrew four screws holding the original radio in place with a screwdriver
5. Take the original radio out of the dash.
Take the original radio out of the dash
6. Disconnect the connectors at the back of the original radio.
Disconnect the connectors at the back of the original radio
7. Check all the accessories for the new Seicane head unit.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane head unit.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane head unit to your original car radio ‘s plugs.
10. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane head unit into the dash.
12. Put everything into their original place.
Can you understand all the installation steps for a 2003-2009 KIA CERATO head unit ? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this popular 2003-2009 KIA CERATO head unit from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:
This remarkable 2003-2009 KIA CERATO head unit features with built-in GPS navigation, DVD player, Bluetooth, radio, etc., you can almost get everything you want from a car stereo. You can have a joyful driving experience with the multimedia functions such as bluetooth streaming music, DVD, CD, radio, etc. Just have a great time with it. Good luck!
Recent Comments