First shows you a modern 2004-2013 Seat Altea head unit after installation from Seicane.

2004-2013 Seat Altea head unit after installation

2004-2013 Seat Altea head unit after installation

 

To install such a multifunctional car stereo can bring you a lot of convenience and pleasure in your car, and it’s quite easy to install it. With a detailed installation guide, you can also finish it at your home. If you have the same dashboard as the picture above, you can take this …. Installation guide as a reference as well.

 

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

 

2004-2013 Seat Altea head unit installation guide

Step1: Remove the trim panel.

Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.

2004-2013 Seat Altea head unit installation step 1

2004-2013 Seat Altea head unit installation step 1

 

Step2: Remove the four screws on the radio.

Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new radio.

2004-2013 Seat Altea head unit installation step 2

2004-2013 Seat Altea head unit installation step 2

 

Step3: Take the factory radio out of the dash.

After the four screws are unscrewed, you can easily pull the factory radio out of the dash.

2004-2013 Seat Altea head unit installation step 3

2004-2013 Seat Altea head unit installation step 3

 

Step4: Disconnect the wiring harness.

Before you put the factory radio aside, please disconnect the wiring harness at the back of it.

2004-2013 Seat Altea head unit installation step 4

2004-2013 Seat Altea head unit installation step 4

 

Step 5: Connect the new Seicane head unit to the original wiring harness as the user manual or the wiring diagram shows.

 

Step 6: Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

 

Step 7: Put the new Seicane head unit into the dash and install four screws.

 

Step 8: Install the trim panel into its original place.

 

That’s all the installation guide for a 2004-2013 Seat Altea head unit. If you have any questions, you can seek help from your dealer or a professional. If you find it too hard for you to understand all the steps, you’ d better have it installed by a professional.

 

In addition, to make your upgrade successful, you need to make sure you have a right head unit which can be installed in your car without any gap. If you have no idea which unit can fit your car, you can refer to the following link which is about a powerful 2004-2013 Seat Altea head unit from Seicane, you are welcome to view more:

 

http://www.seicane.com/seicane-s128405-8-inch-android-4-4-4-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-with-3g-wifi-mirror-link-obd2-bluetooth-quad-core-cpu-16g-flash

 

This Seat Altea head unit is built in the latest GPS software to lead you to get to the desired destination with the least time under the guidance of turn-by-turn direction and voice prompts. You can wirelessly connect your mobile phone which has Bluetooth function with this unit to have hands-free calls for a safe driving and stream music to relax yourself and your passengers. Other multimedia formats like DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA/JPEG are also supported for you to have fun on all trips.

 

With great performance, this hot-selling Seat Altea head unit is just the best replacement for you to replace your factory radio. Just take it and go! Good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation