To install a new aftermarket car stereo in your car, a lot of convenience and enjoyment is easily available for you, such as GPS navigation function, DVD player, FM/AM radio, wifi, Bluetooth hands-free calling, Bluetooth streaming music, etc. Therefore, more and more car owners are going to upgrade their factory radio. If you also have such a plan, you can refer to this detailed installation guide from Seicane specially for a 2005-2013 VW Volkswagen SAGITR head unit.
2005-2013 VW Volkswagen SAGITR head unit after installation
Please note before the installation:
1.Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
2.A lever and a screwdriver need to be prepared before the installation.
3.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2005-2013 VW Volkswagen SAGITR head unit installation guide
1.Remove the top panel with a lever.
Remove the top panel with a lever
2.Disconnect the connector at the back of the panel.
Disconnect the connector at the back of the panel
3.Unscrew the screw with a screwdriver.
Unscrew the screw with a screwdriver
4.Remove the metal sheet on the top with your hands.
Remove the metal sheet on the top with your hands
5.Unscrew two screws circled in red shown as follows under the metal sheet.
Unscrew two screws circled in red shown as follows under the metal sheet
6.Remove the air conditioner vent with your hands.
Remove the air conditioner vent with your hands
7.Unscrew two screws under the vent with a screwdriver.
Unscrew two screws under the vent with a screwdriver
8.Remove the panel on the original car radio.
Remove the panel on the original car radio
9.Unscrew four screws holding the original car radio with a screwdriver.
Unscrew four screws holding the original car radio with a screwdriver
10.Take the original car radio out of the dash.
Take the original car radio out of the dash
11.Disconnect all the connectors at the back of the original car radio.
Disconnect all the connectors at the back of the original car radio
12.Check all the accessories for the new Seicane head unit.
Check all the accessories for the new Seicane car radio
13.Connect the harnesses to the back of the new Seicane head unit.
Connect the harnesses to the back of the new Seicane car radio
14.Connect the Seicane head unit to your original car radio ‘s plugs.
15.Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16.Put the new Seicane head unit into the dash.
17.Put everything into their original place.
Are you able to install this 2005-2013 VW Volkswagen SAGITR head unit in your car with the help of this step-by-step installation? If you find it too hard for you, you’d better turn to a professional for help. Before and during the installation, you can also seek help from your dealer if you encounter any problem.
Besides, it’s necessary for you to make sure you have a right car stereo for your car. If you have no idea about this, you can refer to this wonderful 2005-2013 VW Volkswagen SAGITR head unit from Seicane. Here’s the link, please click:
This intelligent VW Volkswagen SAGITR head unit allows you to easily navigate your route with the high precision 3D GPS and enjoy music via connecting bluetooth with your mobile phones on the large 8″ touch screen display. With a memory card port and a rearview camera RCA input, the stereo will meet all of your entertainment needs. Add quality and performance to your audio system with this all-in-one VW Volkswagen SAGITR head unit.
Recent Comments