Do you worry about the installation of a new car stereo when you want to upgrade your factory radio? If you say yes, then this article can be helpful for you. Please look at the picture below, it’s a great 2006-2011 Ford Fusion car stereo from Seicane after installation. If your dashboard is the same as it, you can refer to the following detailed 2006-2011 Ford Fusion car stereo installation guide to help with the installation of your new car stereo.
2006-2011 Ford Fusion car stereo after installation
Here are some tips for you before the installation:
1.Please disconnect the power before the installation.
- Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible, so each related part of the unit can be fixed securely.
2006-2011 Ford Fusion car stereo installation guide
- Plug removal tools in the small holes of the factory radio on both sides.
2006-2011 Ford Fusion car stereo installation step 1
- Take the factory radio out of the dash.
2006-2011 Ford Fusion car stereo installation step 2
- Disconnect the antenna at the back of the factory radio.
2006-2011 Ford Fusion car stereo installation step 3
- Disconnect other connectors at the back of the factory radio.
2006-2011 Ford Fusion car stereo installation step 4
- Make antennas and cables of the new Seicane car stereo connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.
- Put the new Seicane car stereo into the dash.
- Turn on the new Seicane car stereo and check whether the car stereo is working properly.
That’s all the installation guide for a 2006-2011 Ford Fusion car stereo. Wish it can be helpful for you. If you have any questions during the whole process, you can ask your dealer or a professional for help. Make sure you are clear about every step before you start to install, for incorrect installation may cause irreparable damage to both your car and your new car stereo.
Besides, it’s also important to choose a suitable car stereo for your car to make sure you have a successful upgrade. To check if you have a fitting car stereo, you can refer to the following Seicane 2006-2011 Ford Fusion car stereo which can work well with your car. Here’s the link:
This 2006-2011 Ford Fusion car stereo is upgraded to the latest Android 4.4.4 to smooth the operation. Coming with a large 7 inch multi-touch screen, you are enabled to easily operate everything while you are driving. The Bluetooth technology allows you to sync your mobile phone for hands-free calls and streaming audio to keep you safe and enjoyable on all trips.
Just reach your destination with this amazing 2006-2011 Ford Fusion car stereo! Good luck to you!
Recent Comments