Have you found that your factory radio is too outdated to be compatible with some modern features to meet your various needs in your car? If your answer toward this question is “yes”, then you can consider replace it with a new aftermarket car radio. To install a new aftermarket car radio in your car, you can find a detailed installation guide to help you. The following is a 2007 2008 2009 2010 2011-2013 FIAT Fiorino car radio installation guide, which can be taken as your reference.
2007 2008 2009 2010 2011-2013 FIAT Fiorino Car Radio after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2007 2008 2009 2010 2011-2013 FIAT Fiorino car radio installation guide
1. The original car radio.
The original car radio
2. Insert the release keys in the slots of the original radio.
Insert the release keys in the slots of the original radio
3. Pull outwards to remove the original radio.
Pull outwards to remove the original radio
4. Disconnect the connectors and cables behind to release the original radio.
Disconnect the connectors and cables behind to release the original radio
5. Use a plastic removal tool to pry the cover and then release it.
Use a plastic removal tool to pry the cover and then release it
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car stereo to your original stereo’s plugs.
9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car stereo into the dash.
11. Put everything into their original place. All the installation is done.
Wish you can get some inspiration from the above installation instruction. If you meet anu questions before or during the installation process, it is suggested that you should consult your dealer, communicate with someone experienced or turn to a professional for help. But if you think it hard for you to finish the whole upgrade process, you’d better go to a car radio upgrade center to ask a professional to help you install the new car radio. To help you select a suitable car radio, I would like to share a remarkable 2007 2008 2009 2010 2011-2013 FIAT Fiorino car radio from Seicane with you. For more details, please click:
This amazing 2007 2008 2009 2010 2011-2013 FIAT Fiorino car radio from Seicane is loaded with the most intelligent and stable Android 7.1.1 operation and a quad-core CPU, and it also comes with a wide range of practical and entertainment features. So it can be regarded as the best replacement for your factory radio. Thanks to the worldwide real-time GPS navigation system, you can easily locate where you are and accurately be guided to your destinations through the turn-by-turn direction and voice prompts. And with dual zone function, this unit enables you to listen to radio/ USB/ SD music playback while navigating, which won’t have any negative influence on GPS function.
Wish this car radio be your best road companion. Good luck!
Recent Comments