If you own a 2007 2008 2009 2010 2011 Toyota CAMRY and plan to upgrade your in-car life, you might want to replace your factory radio with a brand new and multifunctional car radio. And to finish the car radio removal and installation process, you can find a related car radio installation guide to help you with the installation. The following is a 2007 2008 2009 2010 2011 Toyota CAMRY car radio installation instruction from Seicane, which can be taken as your reference.
2007 2008 2009 2010 2011 Toyota CAMRY Navigation System after installation
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. Please prepare a lever and a screwdriver before the removal and the installation.
5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2007 2008 2009 2010 2011 Toyota CAMRY car radio installation instruction
1. The original car radio.
The original car radio
2. Pull out the side covers.
Pull out the side covers
2-1
3. Remove the top cover and remove the plug behind.
Remove the top cover and remove the plug behind
4. Pull out the panel near the shift lever and unplug the connector behind.
Pull out the panel near the shift lever and unplug the connector behind
5. Remove two screws that are holding the bottom panel adn then remove the panel.
Remove two screws that are holding the bottom panel adn then remove the panel
5-1
6. Unscrew four screws that fix the radio on the dashboard.
7. Gently remove the original radio and disconnect the connectors and cables at the back of the radio.
Gently remove the original radio and disconnect the connectors and cables at the back of the radio
8. Check all the accessories for the new Seicane car radio.
9. Connect the harnesses to the back of the new Seicane car radio.
10. Connect the Seicane car radio to your original radio’s plugs.
11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane car radio into the dash.
13. Put everything into their original place. All the installation is done.
That’s all about how to remove and install a 2007 2008 2009 2010 2011 Toyota CAMRY car radio. If you have any doubts, please don’t hesitate to seek help from your dealer, someone experienced or a professional. In order to select an ideal car radio for your beloved car, you may check out the following link which is a remarkable 2007 2008 2009 2010 2011 Toyota CAMRY car radio from Seicane.
This car radio,specific for 2007 2008 2009 2010 2011 Toyota CAMRY, is loaded with the intelligent Android 7.1 operation system, a high-quality quad-core CPU and 2GB RAM. Thus, you can embrace a smoother, faster and easier operation experience as well as enjoy this unit’s higher operation experience.
With the assistance of the 3D GPS navigation system of high accuracy, you can easily know where you are now and find the right way to reach any locations you would like to go to according to turn-by-turn directions and voice prompts. And thanks to this unit’s dual zone function, you can play your favorite music behind the scene under GPS mode without interrupting the navigation.
And through Bluetooth connection between your Bluetooth-enabled mobile phone, both hands-free calls and streaming music are both available for you.
Just install this 2007 2008 2009 2010 2011 Toyota CAMRY car radio in your car and wish you enjoy your driving from now on!
Recent Comments