Here shows a 2007-2010 Ford Expedition car stereo from Seicane after installation. It looks appealing, doesn’t it?
2007-2010 Ford Expedition car stereo after installation
If you are a car owner of Ford Expedition, and you want to enjoy more convenience and enjoyment in your car, then you can take upgrading your factory radio into consideration. A new car stereo can not only bring your a lot of convenience with its practical features but also huge tons of enjoyment with its entertainment functions.
To know the installation instruction is helpful for you to upgrade your factory radio. With a correct installation guide and some related installation experience, you can even achieve the installation on your own. But if it’s the first time for you to install a new car stereo, you’d better install it in a car stereo upgrade center or ask a professional to help you. The following detailed 2007-2010 Ford Expedition car stereo installation guide is for your reference.
Here are some tips for you before the installation:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
2007-2010 Ford Expedition car stereo installation guide
Step 1: Remove the trim around gear shifter.
2007-2010 Ford Expedition car stereo installation step 1
Step 2: Remove screws securing center console lid with a screwdriver.
2007-2010 Ford Expedition car stereo installation step 2
Step 3: Remove the center console trim.
2007-2010 Ford Expedition car stereo installation step 3
Step 4: Remove console side panels on both driver and passenger sides.
2007-2010 Ford Expedition car stereo installation step 4
Step 5: Remove bolts securing radio bezel and AC controls.
2007-2010 Ford Expedition car stereo installation step 5
Step 6: Unplug AC controls (from passenger side).
2007-2010 Ford Expedition car stereo installation step 6
Step 7: Remove the radio bezel and AC controls.
2007-2010 Ford Expedition car stereo installation step 7
Step 8: Remove screws securing radio to the vehicle.
2007-2010 Ford Expedition car stereo installation step 8
Step 9: Take the original radio out of the dash.
Step 10:Make antennas and cables of the new Seicane car stereo connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.
Step 11: Put the new Seicane car stereo into the dash.
Step 12: Turn on the new Seicane car stereo and check whether the radio is working properly.
Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.
It’s normal if you have any questions during the installation of this 2007-2010 Ford Expedition car stereo, please ask your dealer or a professional for help. Make sure you are clear about everything before you begin to install it. You also need to make sure to buy a fitting car stereo for your car, if you have no idea, you can also refer to the following great Seicane 2007-2010 Ford Expedition car stereo as follows:
This 2007-2010 Ford Expedition car stereo with a great DVD player is guaranteed to bring you lots of exhilaration. Besides, you can also play whatever you like by Ipod/USB wired connection to keep yourself and your passengers enjoyable all the way. The GPS system and the Bluetooth technology provides you with the accurate directions as well as a safe and cheerful driving experience.
Wish you will like this wonderful 2007-2010 Ford Expedition car stereo and enjoy your driving from now on!
Recent Comments