Is it difficult for us to install the new car stereo? Most of car owner might feel it hard to do it by themselves. In fact, it’s easy for you to install it with a step-by-step installation instruction. If you are the car owner of Mazda 6, I’d like to introduce a step-by-step installation instruction for a 2008-2015 Mazda 6 Ruiyi car stereo from Seicane to you. Wish you can get some help from this article.

2008-2015 Mazda 6 Ruiyi after installation

2008-2015 Mazda 6 Ruiyi after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008-2015 Mazda 6 Ruiyi car stereo installation instruction

1. Remove your cup holder.

Remove your cup holder

Remove your cup holder

2. Unscrew and remove the shift knob.

Unscrew and remove the shift knob

Unscrew and remove the shift knob

3. Remove the shift trim panel with your hands.

Remove the shift trim panel with your hands

Remove the shift trim panel with your hands

4. Then remove both sides trim panel of the heat control.

Then remove both sides trim panel of the heat control

Then remove both sides trim panel of the heat control

5. Pull out the panel and set it aside.

Pull out the panel and set it aside

Pull out the panel and set it aside

6. Remove four screws on each side of the heat control with a Phillips-screwdriver.

Remove four screws on each side of the heat control with a Phillips-screwdriver

Remove four screws on each side of the heat control with a Phillips-screwdriver

7. Pull out the heat control slowly.

Pull out the heat control slowly

Pull out the heat control slowly

8. Find two screws under the radio and remove them.

Find two screws under the radio and remove them

Find two screws under the radio and remove them

9. Push the top panel and set it aside.

Push the top panel and set it aside

Push the top panel and set it aside

10. Remove two screws with a Phillips-screwdriver as the picture shows.

Remove two screws with a Phillips-screwdriver as the picture shows

Remove two screws with a Phillips-screwdriver as the picture shows

11. Pull out the factory radio slowly.

Pull out the factory radio slowly

Pull out the factory radio slowly

12. Disconnect the original harness and set the factory radio aside.

Disconnect the original harness and set the factory radio aside

Disconnect the original harness and set the factory radio aside

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car radio to your original car radio ‘s plugs.

16. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t,

please check whether all the cables are connected correctly.

17. Put the new Seicane radio into the dash.

18. Put everything into their original place. All the installation is done.

The above is a step-by-step installation instruction for a 2008-2015 Mazda 6 Ruiyi car stereo. After reading this article, can you install the new car stereo by yourself? If you don’t have any experience of installation, you can go to the dealer ask for help. Or arrange the professionals to install it directly.

Besides, you have to check the new car stereo whether can fit your car in the first time. If you still looking for a new one, here I’d like to share a multifunctional 2008-2015 Mazda 6 Ruiyi car stereo from Seicane to you for your reference.

http://www.seicane.com/android-in-dash-car-dvd-player-radio-gps-navigation-system-for-2008-2015-mazda-6-ruiyi-with-bluetooth-mirror-link-hd-touch-screen-obd-dvr-tv-usb-sd-3g-wifi-rearview-camera-ipod-s168001

Equipped with a large 8 inch HD 1024*600 multi-touch screen, this Car DVD player for 2008-2015 Mazda 6 Ruiyi integrated with GPS navigation system greatly simplifies the navigating operation and enhance the display for playing DVDS, CDs, TV programs and music videos, etc. The Bluetooth technology enables you to a safer driving to make phone calls without taking your hands off the steering wheel control. In addition, it supports a backup camera to aid in parking. Enjoy your driving from now and good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation