Do you want to put your car into an amazing entertainment paradise? If you say yes, then you can simply upgrade your factory radio into a new multifunctional car stereo which is usually integrated with the latest GPS navigation system and a powerful DVD player. To help you better upgrade your factory radio, I’ d like to share a step-by-step 2009-2013 Toyota VENZA car stereo installation guide with you. Please look at the picture, it’s a multifunctional Toyota VENZA car stereo from Seicane, if you have the same dashboard, then this article can do great help to you.
2009-2013 Toyota VENZA car stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
2009-2013 Toyota VENZA car stereo installation guide
- Remove the plastic panel with a lever.
1. Remove the plastic panel with a lever
- Unscrew the screws holding the a/c control with a screwdriver.
2. Unscrew the screws holding the ac control with a screwdriver
- Take the a/c control out of the dash.
3. Take the ac control out of the dash
- Disconnect the connectors at the rear of the a/c control.
4. Disconnect the connectors at the rear of the ac control
- Remove all the screws holding the factory radio with a screwdriver.
5. Remove all the screws holding the factory radio with a screwdriver
- Gently take the factory radio out of the dash.
6. Gently take the factory radio out of the dash
- Unplug all the connectors at the back of the factory radio.
7. Unplug all the connectors at the back of the factory radio
- Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.
- Put the new Seicane stereo into your dashboard, you should check whether your connections are correct, the new radio is in right position, and you’d better have a tidy for the cables.
- Check whether the new Seicane stereo is working without problem.
- If there is no problem, firm removed screws and bolts that are put aside, then make trim panel back on your new Seicane stereo.
Can you install your new stereo with this installation guide now? If you have any problems during the whole process of the installation, you can turn to your dealer or a professional for help. If it’s the first time for you to upgrade your radio, then you’d better have it installed by a professional.
Besides, you need to have a suitable stereo for your car. If you don’t have one, I’ d like to recommend a wonderful 2009-2013 Toyota VENZA car stereo from Seicane to you, please click:
This Toyota VENZA car stereo comes with a great performance featured with a lot of practical and entertainment functions including the 3D GPS navigation system, bluetooth technology, a DVD player, Ipod and USB connection, wifi, etc. You can easily sync with your compatible mobile phone to make and receive calls without taking your hands off the steering wheel control as well as stream music via the bluetooth connection.
Recent Comments