There is a common phenomenon that more car owners tend to upgrade a head unit integrated with both practical and entertainment features when they want to enjoy more convenience and enjoyment in car and improve their driving experience. Actually as one of them, you can install a new head unit following a correct installation guide. The following is an installation guide for 2009-2014 Toyota ALPHARD head unit. If you own the same dashboard, you can carefully read it to get some help.
2009-2014 Toyota ALPHARD Audio Head Unit after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tool for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2009-2014 Toyota ALPHARD head unit installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane head unit into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8. Firm the panel on the new Seicane head unit. Finally the new Seicane head unit is installed and a comprehensive test should be conducted on the new head unit.
Firm the panel on the new Seicane head unit. Finally the new Seicane head unit is installed and a comprehensive test should be conducted on the new head unit
Wish the above installation guide can help with your 2009-2014 Toyota ALPHARD head unit installation to some extent. Before the installation, please confirm that you understand every detailed step. If there is any question, you can turn to your dealer or a professional for help. Besides, if you are still searching for a compatible head unit for your car, I’d like to share a great 2009-2014 Toyota ALPHARD head unit from Seicane with you. You may click the link below for more details.
This 2009-2014 Toyota ALPHARD head unit from Seicane, based on the most up-to-date Android 6.0 operation system and a R16 1.6 GHz Quad-core CPU can greatly facilitate your operation. With a super large 9 inch 1024×600 HD multi-touch smart screen, you are able to enjoy the best display effect when you are playing TV programs, videos, movies, etc as well as the visual field of the road ahead. Besides, as for the other various functions of this unit, you can easily control GPS navigation system, CD/DVD player, Bluetooth connectivity, USB connection, etc. Just enjoy your trip with this device installed in your beloved car. Good luck to you!
Recent Comments