To have a relaxing and comfortable car interior, one of the easiest ways is to upgrade your factory radio with a multifunctional car stereo which can support a wide range of features to meet your different needs in a car. To help you install a new car stereo, I’ d like to introduce a detailed installation guide about a 2009-2015 Audi A4 B7 radio from Seicane to you. If you also have the same dashboard, then you can follow this guide to help with your installation.
2009-2015 Audi A4 B7 radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
2009-2015 Audi A4 B7 radio installation guide
- The original center console.
1. The original center console.
- Loosen and take out of the original screen frame.
2. Loosen and take out of the original screen frame.
- Take out the double flashing light button.
3. Take out the double flashing light button.
- Remove the four screws which fixed the screen.
4. Remove the four screws which fixed the screen.
- Pull out the cable on the screen.
5. Pull out the cable on the screen.
- Loosen and take out the air-condition vent grille.
6. Loosen and take out the air-condition vent grille.
- Loosen and take out the air-condition controller.
7. Loosen and take out the air-condition controller.
- Remove the four screws which fixed the original CD player and take out of the player.
8. Remove the four screws which fixed the original CD player and take out of the player.
- Connect the cable as the picture show.
9. Connect the cable as the picture show.
10.Connect the cable with the GPS box.
-
10.Connect the cable with the GPS box.
- Use the support to fixed the GPS box on the glove box.
11. Use the support to fixed the GPS box on the glove box.
- Connect the cable to the screen.
12. Connect the cable to the screen.
- Connect the original power line to the tie line.
13. Connect the original power line to the tie line.
- Connect the tie line to the original car.
14. Connect the tie line to the original car.
- Fixed the screws which remove from the original CD player.
15. Fixed the screws which remove from the original CD player.
- Starting up and test the all functions, after this, install the other part to their original place.
16. Starting up and test the all functions, after this, install the other part to their original place.
Wish the above installation guide can be helpful for you. If you find the dashboard shown in the instruction is different from yours, please don’t worry, it won’t have much influence on the installation. If there is any question, please turn to your dealer for help. Besides, if you are still looking for an ideal radio for your car, then you can refer to this all-in-one 2009-2015 Audi A4 B7 radio from Seicane, please click for more details:
This high quality Seicane Audi A4 B7 radio can provide the most accurate direction and voice prompts for you to find your way to your destination within the least time. To simply pair with your enabled mobile phone, you can easily get access to hands-free calling convenience and streaming music enjoyment due to the built in Bluetooth technology. A backup camera can also be connected with this unit to help you easily park.
Just go to your desired destination with ease with this multifunctional Seicane Audi A4 B7 radio in your car. Wish you a wonderful time with it on all trips. Good luck to you!
Recent Comments