When finding your factory radio can’ t meet all your needs, what would you do? Some car owners may add new features to it. However, not all the factory radio can be compatible with the modern features. Therefore, the wonderful idea is to replace it with a new multifunctional head unit which comes with great utilities and extension for new features. About the installation, here I’d like to introduce a professional 2010-2013 VW Volkswagen POLO car radio installation guide from Seicane to you. If you have the same dashboard as the picture below, you can take it as a reference to help with the installation of your new unit.
2010-2013 VW Volkswagen POLO car radio after installation
Precautions:
1.Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
2.A lever and a screwdriver need to be prepared before the installation.
3.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2010-2013 VW Volkswagen POLO car radio installation guide
1. Remove the top panel with a lever.
Remove the top panel with a lever
2. Disconnect the connector at the back of the panel.
Disconnect the connector at the back of the panel
3. Unscrew the screw with a screwdriver.
Unscrew the screw with a screwdriver
4. Remove the metal sheet on the top with your hands.
Remove the metal sheet on the top with your hands
5. Unscrew two screws circled in red shown as follows under the metal sheet.
Unscrew two screws circled in red shown as follows under the metal sheet
6. Remove the air conditioner vent with your hands.
Remove the air conditioner vent with your hands
7. Unscrew two screws under the vent with a screwdriver.
Unscrew two screws under the vent with a screwdriver
8. Remove the panel on the original car radio.
Remove the panel on the original car radio
9. Unscrew four screws holding the original car radio with a screwdriver.
Unscrew four screws holding the original car radio with a screwdriver
10. Take the original car radio out of the dash.
Take the original car radio out of the dash
11. Disconnect all the connectors at the back of the original car radio.
Disconnect all the connectors at the back of the original car radio
12. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
13. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
14.Connect the Seicane car radio to your original car radio ‘s plugs.
15.Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16.Put the new Seicane car radio into the dash.
17. Put everything into their original place.
Wish the installation above specially for the 2010-2013 VW Volkswagen POLO car radio can be helpful for you. If you have any question, you can consult your dealer. On the other hand, if you find the dashboard in the guide different from yours, please don’t worry, it won’t have much influence on the whole.
Before the installation, it’s essential for you to make sure you have a suitable radio for your car. If you have no idea about this, you can refer to this modern 2010-2013 VW Volkswagen POLO car radio from Seicane. Here’s the link, please click:
The precise navigation is in your reach with this top VW Volkswagen POLO car radio whenever and wherever you go. You can also download thousands of songs to enjoy on the road and meanwhile manage your documents in the outdoor. The beautiful music, the dramatic sound effect and the convenient devices will bring you the best driving experience and make you have the wonderful car life ever since. Good luck to you!
Recent Comments