In order to pursue a high-quality in-car life, you may find that it is a good idea for you to replace your factory radio. Some car owners may hold such an opinion that it can cost a certain amount of money if they got the car stereo installed in a car stereo upgrade center. However, if you know how to install a new car stereo by yourself, you can save quite a little money. The image below is a Seicane 2014 2015 Renault Captur Duster Speaker Sound Audio System after installation. If you own the same dashboard, you may refer to the following car stereo installation instruction.
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2014 2015 Renault Captur Duster car stereo installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
Above is the installation instruction for a 2014 2015 Renault Captur Duster Speaker Sound Audio System. If there is any question, you are welcome to consult your dealer or turn to someone experienced for seeking valuable advice. If you still think it impossible for you to finish the car stereo installation, you can directly go to a car stereo upgrade center to have your stereo installed by a technician. The following link is an excellent car stereo from Seicane specially for 2014 2015 Renault Captur Duster for you as a reference.
Loaded with a wide range of comprehensive functions, this up-to-date car stereo will be one of your wise choices to replace your factory radio for 2014 2015 Renault Captur Duster. With it installed in your car, thanks to the turn-by-turn directions and voice prompts provided by 3D GPS navigation, you are able to reach your destinations where is even hard-to-find sometimes. Besides, the Bluetooth pairing functionality allows you to stay focused on the road ahead and keep your keep your hands on the steering wheel control to get access to phone calls and streaming music. Wish you have a good time in car accompanied by this intelligent car stereo!
Recent Comments