First shows you an image of a 2014 Great Wall Hover H6 car stereo after installation from Seicane.
2014 Great Wall Hover H6 car stereo after installation
When you are going to replace your factory radio, you may worry about the installation is too complicated and dare not install it easily. As a matter of fact, to install a car stereo is not a job specific to a professional. With some related installation experience and a correct installation guide, you can even finish the installation at your home. If you are a car owner of 2014 Great Wall Hover H6 and find your dashboard is the same as that above, then you can refer to the following detailed Great Wall Hover H6 car stereo installation guide to help with your installation.
Here are some tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
2014 Great Wall Hover H6 car stereo installation guide
1·Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
2014 Great Wall Hover H6 car stereo installation step 1
2·Remove screws that fixed the radio on the dashboard.
2014 Great Wall Hover H6 car stereo installation step 2
3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
2014 Great Wall Hover H6 car stereo installation step 3
4·Unplug the connectors at the back of the factory radio.
2014 Great Wall Hover H6 car stereo installation step 4
- Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.
2014 Great Wall Hover H6 car stereo installation step 5
6.Put the new Seicane car stereo into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7· If everything is OK, firm screws into their original place.
2014 Great Wall Hover H6 car stereo installation step 7
8·Firm the panel on the new Seicane car stereo. Finally the new Seicane car stereo is installed and a comprehensive test should be conducted on the new radio.
2014 Great Wall Hover H6 car stereo installation step 8
The above are all the installation steps for a Great Wall Hover H6 car stereo. If you want more information or have any questions, you can ask your dealer or a professional for help. If you find it too hard to understand all the steps, you can go to a car upgrade center to install it. Wish it can be helpful for you.
Before you begin your installation, it’s necessary for you to make sure your new car stereo can work well with your car, so that you can have a successful upgrading. If you are unsure about it, you can refer to the following link which is a Great Wall Hover H6 car stereo from Seicane, please click:
Due to the upgraded Android 4.4.4 and the Quad-core CPU, you can enjoy a smoother and faster performance. By wirelessly connecting your compatible cell phone to this unit, you are able to stay focused on the road ahead and keep your hands on the steering wheel control to make and receive calls to keep safe. In this way, you can also listen to your favorite music of your cell phone or other devices. Find the way with the built-in GPS navigation system, you can go anywhere without getting lost any more.
Wish you can get some help from this article and enjoy your new Great Wall Hover H6 car stereo in your car.
Recent Comments