If you are an owner of 2014 Toyota Prado and are going to upgrade your factory radio with a new aftermarket car stereo. Some of you may want to install it on your own. Maybe some of you have tried and failed. Here I’d like to share the correct installation instructions about a 2014 Toyota Prado car stereo with you. Please look at the below picture which is a Seicane 2014 Toyota Prado car stereo after installation. If you have the same dashboard, you can refer to the below installation guide.
2014 Toyota Prado car stereo after installation
Tips about the installation:
- Please disconnect the power before the installation.
- Please prepare a lever and a screwdriver before the removal and the installation.
- Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
2014 Toyota Prado car stereo installation guide
1·Pull out the speed control with medium force by your hands.
2014 Toyota Prado car stereo installation step 1
2·Unplug the harness behind the speed control, and set it aside.
2014 Toyota Prado car stereo installation step 2
3·Unscrew four 10mm bolts holding the radio in place.
2014 Toyota Prado car stereo installation step 3
4·When the screws are out, pull the radio out of the dash.
2014 Toyota Prado car stereo installation step 4
5·Disconnecting the harnesses behind the factory radio.
2014 Toyota Prado car stereo installation step 5
6·Make antennas and cables of the Seicane stereo connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.
7·Connect the new Seicane stereo to your Toyota PRADO, you should check your connections, the new unit’s position, and you’d better have a tidy for the cables.
8·Check whether the unit is working without problem.
9·When the radio is working properly, push the radio into place, firm four removed bolts that are put aside, then make panel back on your new Seicane stereo.
Wish the above installation guide can be helpful for you. If you have any questions, you can ask your dealer or a professional for help. If you think it hard to understand all the steps, you’d better go to a car stereo upgrade center to install it or ask a professional technician to help.
Besides, it’s important for you to confirm you have a right stereo for your car. Or a wrong stereo can’t be compatible with your car. If you are unsure about this, you can refer to the following link which is about a Toyota Prado car stereo from Seicane, please click:
Equipped with an Android 4.4.4 operating system and a RK3188 1.6 GHz Cortex A9 Quad-core CPU, this Toyota Prado car stereo of advanced configuration is easy to operate with a large 8 inch HD 1024*600 multi-touch screen. The Bluetooth technology to sync your mobile phone is included in it, so that you can enjoy hands-free calls and streaming audio. The USB wired connection and iPod availability greatly increase ways to relax and entertain.
Just get to your destination with this excellent Toyota Prado car stereo and have a great time with it!
Recent Comments