How to upgrade a 2015 Ford Mustang radio with 3G WiFi Bluetooth GPS Navigation system Capacitive Touch Screen TPMS

With the development of technology, things are updated more and more quickly. The car radio is no exception. More and more new features can be compatible with a car radio. To enjoy more functions in your car, it’s wise of you to upgrade your factory radio. Here I’d like to share a detailed installation guide about a 2015 Ford Mustang radio from Seicane with you. If you also have the same dashboard, you can read this article carefully for further reference.

2015 Ford Mustang radio after installation

Here are some tips for you before the installation:

1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
2. A lever and a screwdriver need to be prepared before the installation.

2015 Ford Mustang radio installation guide

Step 1: Remove the trim around gear shifter.

2015 Ford Mustang radio installation step 1

Step 2: Remove screws securing center console lid with a screwdriver.

2015 Ford Mustang radio installation step 2

Step 3: Remove the center console trim.

2015 Ford Mustang radio installation step 3

Step 4: Remove console side panels on both driver and passenger sides.

2015 Ford Mustang radio installation step 4

Step 5: Remove bolts securing radio bezel and AC controls.

2015 Ford Mustang radio installation step 5

Step 6: Unplug AC controls (from passenger side).

2015 Ford Mustang radio installation step 6

Step 7: Remove the radio bezel and AC controls.

2015 Ford Mustang radio installation step 7

Step 8: Remove screws securing radio to the vehicle.

2015 Ford Mustang radio installation step 8

Step 9: Take the original radio out of the dash.

Step 10:Make antennas and cables of the new Seicane radio connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.

Step 11: Put the new Seicane radio into the dash.

Step 12: Turn on the new Seicane radio and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

That’s all the installation guide for a 2015 Ford Mustang radio, wish it can be helpful for you. If you don’t understand any step, you can turn to your dealer or a professional for help. Please make sure you are clear about every step before you start your work. To help you find an ideal radio for your car, I’ d like to recommend a modern 2015 Ford Mustang radio from Seicane, please click:

http://www.seicane.com/10-2-inch-android-radio-for-2015-ford-mustang-with-3g-wifi-bluetooth-gps-navigation-system-capacitive-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-headrest-monitor-control-usb-sd-video-s085693

This unit features a large 10.2″ inch multi-touch screen bluetooth interface for you to wirelessly link with your mobile phone for hands-free calls and streaming music. Get to your destination on time with the most accurate direction and spoken guidance offered by the precise GPS navigation system.

Enjoy all your trips with this fantastic Ford Mustang radio in your car. Wish you have a great time with it. Good luck to you!

Related Posts

• December 28, 2012 -- Car DVD player for BMW 3 Series E90(manual air-conditioner) (0)
• May 31, 2013 -- Mercedes Benz W209 2004 dvd player head unit navigation system (0)
• June 13, 2013 -- Porsche cayman radio gps navigation (0)
• May 5, 2016 -- The detailed installation instruction for a 2005 2006 Dodge Viper radio with RDS Bluetooth IPOD Dual Zone AUX touch screen (0)
• January 11, 2018 -- How to Replace a 2012 PEUGEOT 4008 Car Radio Not Working with an Aftermarket Bluetooth Navigation System DVD Player (0)