To have more fun in your car, it is highly suggested that you should upgrade your factory radio which can be compatible with a lot of multimedia formats. As the installation of a new car radio is not difficult, you can also become a “professional” who can finish the installation. Now I’d like to share a detailed 2016 Kia K5 GPS Bluetooth DVD Car Radio installation guide from Seicane with you as follows. If you own a 2016 Kia K5, you can refer to it.
2016 Kia K5 GPS Bluetooth DVD Car Radio after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2016 Kia K5 car radio installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
That’s all about how to remove and install a 2016 Kia K5 GPS Bluetooth DVD Car Radio. If you have anything you cannot understand, you can seek help from your dealer or a professional. Besides, you can also ask someone experienced to guide you alongside. To make sure you can succeed in the upgrade, you have to choose a suitable car radio fro your car. If you have no idea, you can refer to this up-to-date Seicane 2016 Kia K5 GPS Bluetooth DVD Car Radio. You may click the link below for more details.
Based on the advanced Android 5.0.1 operating system and the powerful 1.8 GHz A9 Quad-core CPU, this smart car radio allows you to enjoy smoother and faster operation experience. With this radio in your car, you can be provided with the most precise direction so as to have the best route option to get to your ideal destinations. By linking your Bluetooth-enabled mobile phone with this radio, you can freely get access to dial, receive or reject hands-free calls by keeping your hands on the steering wheel control, which can promise you a safe driving to a large extent. If you like this car radio, hurry up to add it to your cart!
Recent Comments