Are you desired to install a multifunctional head unit in your car to enjoy more features while you are driving your beloved car to your desired destination? If you say yes, then this article is worth your reading. Please look at the image below, which is an intelligent Toyota Land Cruiser 200 head unit from Seicane, if you exactly have the same dashboard, then you can read this article carefully to help with the installation.

Toyota Land Cruiser 200 head unit after installation

Toyota Land Cruiser 200 head unit after installation

 

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

 

Toyota Land Cruiser 200 head unit installation guide

1.Take out the two blots that distributed on both sides of handbrake.

1.Take out the two blots that distributed on both sides of handbrake

1.Take out the two blots that distributed on both sides of handbrake

 

2.Remove screws with your hand.

2.Remove screws with your hand

2.Remove screws with your hand

 

3.After the bolts are removed, take out the left and right loosed dashboard.

3.After the bolts are removed, take out the left and right loosed dashboard

3.After the bolts are removed, take out the left and right loosed dashboard

 

4.Disconnect the cable between them.

4.Disconnect the cable between them

4.Disconnect the cable between them

 

5.Get out the screw with your hands.

5.Get out the screw with your hands

5.Get out the screw with your hands

 

6.Remove five screws as the picture show.

6.Remove five screws as the picture show

6.Remove five screws as the picture show

 

7.Pull the original radio out of the dashboard.

7.Pull the original radio out of the dashboard

7.Pull the original radio out of the dashboard

 

8.Disconnect the connectors at the back of the original radio.

8.Disconnect the connectors at the back of the original radio

8.Disconnect the connectors at the back of the original radio

 

9.Connect the cables on the new Seicane unit as the user manual shows and place them well.

10.Put the new Seicane unit into the dash.

11.Turn on the new Seicane unit and have a comprehensive check if it works well.

12.Install 4 screws back to their original position.

13.Check whether the unit is working without problem.

14.If everything is OK, make trim panel back on your new Seicane unit.

Wish the above installation guide can be helpful for you. If you find it too hard for you to understand all the steps, you’d better ask a professional to help you. If there is any further question, you can consult your dealer. Besides, if you don’t have a n ideal unit for you car, I’d like to recommend a wonderful Toyota Land Cruiser 200 head unit from Seicane to you, please click for more details:

 

http://www.seicane.com/9-inch-android-4-4-touch-screen-radio-bluetooth-gps-navigation-system-for-toyota-land-cruiser-200-with-tpms-dvr-obd-ii-usb-sd-3g-wifi-rear-camera-steering-wheel-control-hd-1080p-video-aux-s082694

 

This modern Toyota Land Cruiser 200 head unit comes with a great GPS navigation system for you to get to your desired destination. The lane assist, 3D street view, landmark display, route planning, text-to-speech guidance are all provided for you to find your way to any unfamiliar location with ease. Besides, you can relax yourself and your passengers with a great deal of multimedia playback supported. By easily pairing with your enabled mobile phone, you can have  hands-free calls and stream music to get access to safety and pleasure on all your trips.

 

Just have an exciting driving experience with this Toyota Land Cruiser 200 head unit on all your trips. Wish you a wonderful trip all the time!

 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation