Can you believe that a new car radio can not only guide you to your destinations with its accurate direction but also bring you a lot of fun at the same time? And now most car radios are plug and play, so the installation process is not complicated, and you can easily replace your factory radio under the guidance of a detailed installation instruction. The following is a 2002 2003 2004 2005 2006-2011 VW volkswagen TOUAREG car radio installation instruction from Seicane. If you have the same dashboard and plan to replace  your factory radio, you can refer to this instruction.

2002 2003 2004 2005 2006-2011 VW volkswagen TOUAREG GPS Bluetooth Car Radio after installation

2002 2003 2004 2005 2006-2011 VW volkswagen TOUAREG GPS Bluetooth Car Radio after installation

Please notice before the installation:

1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2. A lever and a screwdriver need to be prepared before the installation.

3. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2002 2003 2004 2005 2006-2011 VW volkswagen TOUAREG car radio installation instruction

1. Remove the original radio with the unlock tools.

Remove the original radio with the unlock tools

Remove the original radio with the unlock tools

2. Disconnect the harness in the back.

Disconnect the harness in the back

Disconnect the harness in the back

3. Unplug the connectors.

Unplug the connectors

Unplug the connectors

4. Disconnect the car radio wiring.

Disconnect the car radio wiring

Disconnect the car radio wiring

5. Remove screws behind the console.

Remove screws behind the console

Remove screws behind the console

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original car radio ‘s plugs.

9. Put the new Seicane stereo into dash.

10. Make sure everything is ok and turn on the new Seicane car stereo. If it doesn’t, please check whether all the cables are connected correctly.

 

Wish you can learn some skills from the above installation steps. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional. Or if you think it too hard to finish the whole installation process on your own, you can directly arrange a professional technician to install the new car radio.

Besides, to help you select an ideal car radio for your car, here I’d like to share a remarkable 2002 2003 2004 2005 2006-2011 VW volkswagen TOUAREG car radio from Seicane with you for a reference.

https://www.seicane.com/2002-2011-vw-volkswagen-touareg-android-radio-gps-dvd-player-navigation-system-with-bluetooth-hd-touch-screen-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-ipod-steering-wheel-control-usb-sd-mirror-link-s6921

This remarkable car radio is loaded with the most advanced Android 7.1 operation system and a strong quad-core CPU processor to enhance and improve its capabilities and performance.

Even you don’t have a good sense of directions in daily life, you can depend on the built-in GPS module to get access to voice cues, distance information, POIs and route planning. These features make you easily and quickly locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts.

 

Additionally, you can make full use of its entertainment feature to relax both yourself and your passengers.

Wish you have a nice trip accompanied by this intelligent car radio. Good luck!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation