After getting an ideal head unit for your car, you must want to install it immediately, so that you can enjoy the new features and have a different driving experience. Some car owners may choose to install it by themselves in order to save money. However, incorrect installation may cause unexpected damage, therefore, you’d better ask a professional for help if you don’t have any experience on it. The picture below is the latest 2011 2012 2013 VW Volkswagen New Beetle 2 radio from Seicane, if you have the same dashboard, you can take this installation guide as a reference.
2011 2012 2013 VW Volkswagen New Beetle 2 radio after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
2011 2012 2013 VW Volkswagen New Beetle 2 radio installation guide
Step1: Remove the trim panel.
Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.
2011 2012 2013 VW Volkswagen New Beetle 2 radio installation step 1
Step2: Remove the four screws on the radio.
Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new radio.
2011 2012 2013 VW Volkswagen New Beetle 2 radio installation step 2
Step3: Take the factory radio out of the dash.
After the four screws are unscrewed, you can easily pull the factory radio out of the dash.
2011 2012 2013 VW Volkswagen New Beetle 2 radio installation step 3
Step4: Disconnect the wiring harness.
Before you put the factory radio aside, please disconnect the wiring harness at the back of it.
2011 2012 2013 VW Volkswagen New Beetle 2 radio installation step 4
Step 5: Connect the new Seicane radio to the original wiring harness as the user manual or the wiring diagram shows.
Step 6: Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Step 7: Put the new Seicane radio into the dash and install four screws.
Step 8: Install the trim panel into its original place.
Wish the above installation guide can do some help for you. Please make sure you are clear about every step before you start to install. If you find it too hard to understand all the steps, you ‘d better have your new radio installed by a professional or go to a car stereo upgrade center for help.
Moreover, you need to be clear that your new radio can be compatible with your car. If you don’t have an ideal one, I’d like to recommend an up-to-date 2011 2012 2013 VW Volkswagen New Beetle 2 radio from Seicane to you. Here’s the link:
This VW Volkswagen New Beetle 2 radio supports almost all the popular audio and video formats, such as DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA/JPEG, you won’t feel tired and boring in the long trip any longer. You can easily pair your mobile phone with this unit for wireless communication with your callers by keeping your hands still on the steering wheel control. Just enjoy your favorite music and navigate to your destination with this amazing GPS navigation system.
Just go with this remarkable VW Volkswagen New Beetle 2 radio and have a wonderful time on all your trips from now ons!
Recent Comments