If you are searching for some ways to upgrade your in-car environment and improve your driving experience, I’d like to suggest you to replace your factory radio with a brand new multifunctional car radio. With such a new aftermarket car radio installed in your car, you can effectively enrich your car interior environment and in-car life.
The following is a 2006 2007 2008 2009 2010-2011 KIA Rondo car radio installation instruction from Seicane. If you have the same or similar dashboard, you can refer to the following instruction and follow it to deal with the installation.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2006 2007 2008 2009 2010-2011 KIA Rondo car radio installation instruction
1. Pry around the edges of the trim panel with a lever.
2. Remove the trim panel.
3. Disconnect all the connectors of the trim panel.
4. Unscrew all the screws holding the original car radio in place with a screwdriver.
5. Gently take the original car radio out of the dashboard.
6. Disconnect all connectors at the back of the original car radio.
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original car radio ‘s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Above is the whole installation process of a 2006 2007 2008 2009 2010-2011 KIA Rondo car radio. If you have any doubts, you can browse some professional websites. Besides, you can contact your dealer for seeking advice, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio directly.
If you don’t know how to select an ideal car radio for your beloved car, I would like to recommend an amazing 2006 2007 2008 2009 2010-2011 KIA Rondo car radio from Seicane to you. Here comes the link, please click:
With this car radio installed in your car, you are going to embrace a smoother, faster and easier operation experience since it is loaded with the latest Android 7.1 operation system, high-quality quad-core CPU processor and 2GB RAM.
With the assistance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to easily and quickly locate where you are now and find the right way to reach your desired destinations. Besides, this unit also comes with dual zone function, which enables you to listen to your favorite music while navigating, and the music will automatically switch to the GPS voice.
Additionally, through the wireless connection between your Bluetooth-enabled mobile phone and this unit, without taking your hands off the steering wheel, you can dial, receive, reject and mute Bluetooth hands-free phone calls and enjoy Bluetooth streaming music from your phone music playlists.
Just add this multifunctional car radio to your shopping cart. Good luck!
Recent Comments