After being used for a long time, a factory radio may not be up-to-date enough to support the latest navigation map and help you accurately find the right way to get to your destinations. Besides, your factory radio may not support some other comprehensive features which can enrich your in-car life. To help you embrace a brand new driving experience, it is suggested that you should remove your factory radio and install a brand new multifunctional car radio. The following is a 2012 2013 2014 2015 2016 Skoda Rapid car radio installation guide. If you have the same or similar dashboard, you can refer to it.
2012 2013 2014 2015 2016 Skoda Rapid Car Radio after installation
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2012 2013 2014 2015 2016 Skoda Rapid car radio installation guide
1. Remove the top panel with a lever.
Remove the top panel with a lever
2. Disconnect the connector at the back of the panel.
Disconnect the connector at the back of the panel
3. Unscrew the screw with a screwdriver.
Unscrew the screw with a screwdriver
4. Remove the metal sheet on the top with your hands.
Remove the metal sheet on the top with your hands
5. Unscrew two screws circled in red shown as follows under the metal sheet.
Unscrew two screws circled in red shown as follows under the metal sheet
6. Remove the air conditioner vent with your hands.
Remove the air conditioner vent with your hands
7. Unscrew two screws under the vent with a screwdriver.
Unscrew two screws under the vent with a screwdriver
8. Remove the panel on the original car radio.
Remove the panel on the original car radio
9. Unscrew four screws holding the original car radio with a screwdriver.
Unscrew four screws holding the original car radio with a screwdriver
10. Take the original car radio out of the dash.
Take the original car radio out of the dash
11. Disconnect all the connectors at the back of the original car radio.
Disconnect all the connectors at the back of the original car radio
12. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
13. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
14. Connect the Seicane car radio to your original car radio’s plugs.
15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16. Put the new Seicane car radio into the dash.
17. Put everything into their original place.
If you have any doubts, don’t be too worried. Under this circumstance, please feel free to seek help from your dealer, someone experienced or turn to a professional. Or if you are afraid of making damage to either your car radio or your car, you can go to a car radio upgrade center and have the new car radio installed by a professional technician. While for the selection of an ideal car radio, if you have no ideas, here I would like to share an amazing 2012 2013 2014 2015 2016 Skoda Rapid car radio from Seicane with you. For more details, please click:
This car radio is loaded with advanced and stable Android 7.1 operation system and a powerful quad-core CPU processor, which enables you to have a much easier, smoother and faster operation experience. Besides, this car radio comes with a wide range of practical and entertainment features.
Even you drive around a totally unfamiliar location, you don’t have to worry about getting lost. Under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to locate where you are and navigate to your desired destinations. And while navigating, with dual zone function, this unit enables you to listen to radio, USB or SD card music playback.
Under wireless Bluetooth technology, you are able to connect your Bluetooth-enabled mobile phone with this car radio. Therefore you can dial, answer, reject and mute hands-free phone calls as well as listen to Bluetooth streaming music from your phone. By doing so, you will gain a lot of convenience and enjoyment.
Don’t forget to add this car radio to your shopping cart if you like it. Good luck!
Recent Comments