When you think your factory radio can no longer meet your needs, it’s probably because it can’t be compatible with many up-to-date features. Then it’s time for you to consider to replace it with a multifunctional car stereo for more features, so that you can easily have fun on all your trips. Please look at the image, it’s a top 2003-2011 Porsche Cayenne head unit from Seicane. If you find you have the same dashboard, then it’s great for you to read this passage carefully for the detailed installation guide.
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
2003-2011 Porsche Cayenne head unit installation guide
- Pry out the trim piece along the perimeter of the center dashboard with a lever.
- Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation.
- Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily.
- Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray.
- Press the tab (green arrow) on the antenna lead and pull it out of the stereo.
- Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years.
- Connect the cables of the new Seicane head unit according to the guidance of the user manual.
- Connect the connectors and the antenna at the back of the new radio.
- Put the new Seicane head unit back into the dash.
- Install two screws and trim piece.
- Turn on the new radio and have a comprehensive test.
Wish the above installation instruction can do some help for you. If you have any questions, you can seek help from your dealer or a professional. However, if you think it too hard for you to understand all the steps, you’d better go to a car stereo upgrade center or ask a professional for help.
Some of you may don’t have an ideal car radio replacement now, so I ‘d like to recommend an ideal one from Seicane to you, please click:
This 2003-2011 Porsche Cayenne head unit an support the optic fiber decoder. If your car comes with optic fiber Bose and the year is 2005-2011, this decoder can be installed into your car to support your original car’s optic fiber Bose system, and the sound is in high quality. The installation of the decoder is very easy and is just plug and play. On the other hand, if your car comes without optic fiber Bose system, then this unit is very easy to install and is plug and play.
A number of entertainment features are available in this Porsche Cayenne radio for you to keep relaxed all the way, for example, the region-free DVD disk player allows you to play DVDs from every country in the world. A safe and happy journey can always be with you when you sync your enabled mobile phone with this unit to have hands-free calls and stream music. Reach your destination with this latest GPS navigation system which allows for a lifetime traffic situation update to help you avoid the incorrect information.
Just enjoy your amazing trips with this Porsche Cayenne radio in your car. Good luck to you!
Recent Comments