Driving your beloved car to your desired destination is really exciting, isn’t it? Actually, it’ll become much more exciting if you upgrade your factory radio which usually comes with single function. If you are going to replace your factory radio, you can find a step-by-step 2014 Mercedes-Benz vito viano head unit installation guide to help you with the installation. Now I’d like to introduce a professional Mercedes-Benz vito viano head unit installation instruction from Seicane to you. Wish it can be helpful for you.
2014 Mercedes-Benz vito viano car radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2014 Mercedes-Benz vito viano head unit installation guide
1. Detach the outer frame of the original car radio.
Detach the outer frame of the original car radio
2. Use a screw driver to remove the screws marked with red circles.
Use a screw driver to remove the screws marked with red circles
3. Remove the screw on the lower right.
Remove the screw on the lower right
4. Remove the screw on the lower left.
Remove the screw on the lower left
5. Remove the screw on the upper left.
Remove the screw on the upper left
6. Remove the screw on the upper right.
Remove the screw on the upper right
7. Use a screw driver to remove the screws marked with red circles.
Use a screw driver to remove the screws marked with red circles
8. Remove the original car radio.
Remove the original car radio
9. Check all the accessories for the new Seicane head unit.
Check all the accessories for the new Seicane car radio
10. Connect the harnesses to the back of the new Seicane head unit.
Connect the harnesses to the back of the new Seicane car radio
11. Insert the plug of the car into the socket of unit.
Insert the plug of the car into the socket of unit
12. Remarks
a. Plug in the radio antenna.
b. Plug in the GPS antenna.
Remarks a. Plug in the radio antenna. b. Plug in the GPS antenna.
13. Install the new Seicane head unit into the dashboard.
Install the new Seicane radio into the dashboard
14. Fasten the new Seicane head unit with 4 screws and install the frame back.
Fasten the new Seicane radio with 4 screws and install the frame back
15. Turn on the new Seicane head unit to have a comprehensive check. If everything works well, all the installation is done. If not, please check if all the cables are connected correctly.
Now can you install your new radio in you car under the guidance of this detailed installation guide specially for a 2014 Mercedes-Benz vito viano head unit? If not, don’t worry, you can ask a professional for help. If there is any question, you can consult your dealer. But if you don’t have an ideal radio for your car, I’d like to recommend this advanced 2014 Mercedes-Benz vito viano head unit from Seicane to you. Here’s the link, please check out the following link for more details:
You can install this popular 2014 Mercedes-Benz vito viano head unit to replace your factory radio. Built in Bluetooth makes hands-free calling possible and with the navigation, you will never get lost again. Keep this upgraded head unit as your road companion, joy and fun will always be with you on all your future trips. Good luck to you!
Recent Comments