Here comes an intelligent 2004 2005 2006 2007 Chrysler Town & Country radio from Seicane after installation. If you find your factory radio malfunction or can’t meet your needs any more, then it’s wise of you to replace it with such a multifunctional radio which can support multiple functions. To install it in your car, here you can refer to this step-by-step installation instruction.
2004 2005 2006 2007 Chrysler Town & Country radio after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2004 2005 2006 2007 Chrysler Town & Country radio installation guide
1.Remove the trim piece above cup holder with a lever.
1.Remove the trim piece above cup holder with a lever.
2.Remove 2 screws behind the trim piece.
2.Remove 2 screws behind the trim piece.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
4.Remove 4 screws which holds the factory radio in place.
4.Remove 4 screws which holds the factory radio in place.
5.Take out the factory radio.
5.Take out the factory radio.
6.Disconnect the smaller harness on the behind of the factory radio.
6-1.Disconnect the smaller harness on the behind of the factory radio.
6-2. Check all the accessories for the new Seicane car radio.
7.Connect the Seicane radio to your original car radio ‘s plugs.
7. Connect the Seicane car radio to your original car radio ‘s plugs.
8.Connect the smaller harness at the back of the new Seicane radio.
9.Put the new Seicane radio back into the dash.
10.Install four screws and trim panel.
11.Install 2 screws behind the trim piece and the trim piece.
12.Turn on the new radio and have a comprehensive test.
13.Tidy up everything in your car, and all the installation is done.
That’s all the installation instruction on how to install a 2004 2005 2006 2007 Chrysler Town & Country radio. Wish you can get some help from it. If you encounter any question, you can consult your dealer. Please make sure you are clear about every step before the installation.
Besides, it’s essential for you to check if your new radio can fit your car. if you have no idea, you can refer to this modern 2004 2005 2006 2007 Chrysler Town & Country radio from Seicane. You can also seek help from the website as well, please click:
This superior Chrysler Town & Country radio comes with a lot of practical and entertainment features for you to upgrade your factory radio to higher performance. The latest 3D GPS navigation system of high precision, DVD player, bluetooth technology, FM/AM radio, wifi, TV, USB and SD connection, etc. are all provided for you to get the convenience as well as enjoyment in your vehicle. Just take it and go with pleasure right now!
Recent Comments