Nowadays, cars are becoming more common globally and more and more people choose to buy a car for convenience. If you want a better driving experience, the simplest way is to upgrade your stock radio. I’d like to introduce a step-by-step installation guide for a 2016 Kia Sportage android Sat Navi stereo from Seicane to you. Wish you like it.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2016 Kia Sportage android Sat Navi stereo installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
Can you understand all the steps for the 1998-2002 Mercedes Benz A Class W168? If you can’t understand any step of installation, you can turn to the dealer or professional to ask for help. Or arrange them to install it directly. Moreover, you have to check whether the new car stereo can work well in your car at first. If you are still looking for one, here is a great 2016 Kia Sportage android Sat Navi stereo from Seicane for your reference.
This OEM 2016 Kia Sportage Android 7.1.1 Car Stereo DVD GPS System features built-in Bluetooth technology for simple music streaming from Bluetooth-enabled devices and making phone calls using the integrated microphone. And the 3D navigation provides you with accurate guidance to get to the destinations in the least time.
Recent Comments