Here comes an attractive 2012+ Mitsubishi Universal car stereo from Seicane. It looks quite pretty, doesn’t it?
Mitsubishi Universal car stereo after installation
Some car owners may think it’ s impossible for them to install a stereo on their own. Actually, more and more car owners have demonstrated successful installation on their own at home. With some related installation experience, you can also do it under the help of a detailed installation guide. If you also have the same dashboard as above, the following instructions can be helpful for you.
Some tips before the installation:
- Please disconnect the power before the installation.
- Please prepare a lever and a screwdriver before the removal and the installation.
- Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
Mitsubishi Universal car stereo installation guide
1·Remove the original console panel with a plastic knife, pry gently along the gap and pick up the panel. Then set it aside.
1. Remove the original console panel with a plastic knife
2·Remove the four screws that fixed the radio on the dashboard. Remove these screws will not be a difficult job.
2. Remove the four screws that fixed the radio on the dashboard
3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
3. Pull the factory radio out of the dash
4·Unplug the connectors.
4. Unplug the connectors
5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move to the installation of the Seicane stereo.
5. Remove the brackets on both sides of the factory radio
6·Install the brackets on both sides of the Seicane stereo.
7·Dock the connectors of the original vehicle and the upgraded car audio.
7. Dock the connectors of the original vehicle and the upgraded car audio
8·Insert the wires to the appropriate location of the upgraded radio. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.
9·Fix the Seicane radio with the four screws.
7. Dock the connectors of the original vehicle and the upgraded car audio
10·Firm the console panel. Finally the new Seicane stereo is installed and a comprehensive test should be conducted on the new stereo.
7. Dock the connectors of the original vehicle and the upgraded car audio
Wish you can get some help from the above installation guide for a Mitsubishi Universal car stereo. It is not too difficult to install a new car stereo in your car. If you can’t do it on your own, please ask a professional to help. Besides, you need to find a suitable stereo as well. If you don’t have one, it’s wise of you to take this intelligent Mitsubishi Universal car stereo into consideration, please click for more details:
This Mitsubishi Universal car stereo comes with a worldwide real-time GPS navigation system let you go anywhere without getting lost with its most accurate direction and spoken guidance. To simply pair your compatible mobile phone with this stereo, you are allowed to make and receive hands-free calls and stream your favorite music from the playlist in your cell phone or other portable devices.
Recent Comments