If you are eager a wide range of upgraded and modern features in car so as to gain more convenience and enjoyment, you can think about replacing your factory radio with a new aftermarket car stereo. Since most car radios are plug and play, the installation is not complicated. So you can find a related installation guide can follow it to install the new car radio by yourself. Here I would like to introduce a 2013 2014 2015 SEAT EXEO car radio installation guide from Seicane to you. If you have the same vehicle type, you might as well refer to this guide.
2013 2014 2015 SEAT EXEO Car Stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2013 2014 2015 SEAT EXEO car radio installation guide
1. There are four removal slots in the radio.
There are four removal slots in the radio
2. Prepare four removal keys like what is shown in the picture below.
Prepare four removal keys like what is shown in the picture below
3. Insert the release keys into the holes of the radio. Please make sure that you put the key with the flat side facing the outside of the radio.
Insert the release keys into the holes of the radio. Please make sure that you put the key with the flat side facing the outside of the radio
4. Pull outwards to release the radio.
Pull outwards to release the radio
5. Disconnect the connectors and cables at the back of the radio.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
Wish you can learn some skills from the above installation guide. If you are trapped into some troubles, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. If you are afraid of making damage to either your car radio or your car, you can go to a car radio upgrade center to have your new car radio installed by a technician. Besides, it is essential for you to select an ideal car radio for your beloved car, here I would like to share a great 2013 2014 2015 SEAT EXEO car radio from Seicane with you for your reference. For more details, please click:
Upgraded to the most advanced and stable Android 7.1 operation system and a powerful quad-core CPU processor, this car radio can facilitate the operation so as to provide its users with a much smoother and faster operation experience.
After you get this car radio and install it in your car, you will find you are able to go to a wide range of comprehensive features, including 3D GPS navigation, FM/AM radio tuner, DVD player, Bluetooth hands-free calls, Bluetooth streaming music, AUX, steering wheel control, USB& SD card connection, etc.
With the assistance of the high-end 3D GPS navigation system, you can easily know your current locations and accurately get to your desired destinations through turn-by-turn directions and voice prompts. Additionally, this unit’s dual zone function enables you to listen to your favorite music while navigating, which won’t have any negative influence on GPS function.
Wish you like this unit and good luck to you!
Recent Comments