It is quite dangerous when you get tired or bored after a long-time driving in your car. To cheer you up, it is suggested that you should install a powerful multifunctional car stereo to replace your factory mono-functional stereo. With the new advanced car stereo, you can not only enjoy its great entertainment but also other practical functions it brings to you. This article is the installation guide of a 2002-2009 Toyota Prado Cruiser 120 Bluetooth Car Stereo, which you can take as a reference.
2002-2009 Toyota Prado Cruiser 120 Bluetooth Car Stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2002-2009 Toyota Prado Cruiser 120 car stereo installation guide
1. Gently squeeze, pull and lift away the surrounding panels on each side.
Gently squeeze, pull and lift away the surrounding panels on each side
2. Grip gently at the bottom and lift the air conditioning vents.
Grip gently at the bottom and lift the air conditioning vents
3. Squeeze clips to release electrical connectors.
Squeeze clips to release electrical connectors
4. There are four screws holding the radio on the dashboard. Remove them with a screwdriver.
There are four screws holding the radio on the dashboard. Remove them with a screwdriver
5. Gently take out the original radio.
6. Disconnect connectors and cables at the back the radio.
7. Check all the accessories for the new Seicane car stereo.
8. Connect the harnesses to the back of the new Seicane car stereo.
9. Connect the Seicane car stereo to your original stereo’s plugs.
10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car stereo into the dash.
12. Put everything into their original place. All the installation is done.
Wish the above installation guide can be helpful for you. If you are be in trouble, you may seek help from your dealer or a professional. Or during the installation, you can ask someone experienced to help you alongside. But if you still think it impossible for you to finish the whole installation process, you’d better go to a car stereo upgrade center to arrange a technician to install the new car stereo. To help you find a suitable stereo , here I would like to recommend a Seicane 2002-2009 Toyota Prado Cruiser 120 Bluetooth Car Stereo to you. For more details, please click:
Upgraded to the advanced Android 5.0.1 operation system as well as a powerful 1.8 GHz Cortex A9 Quad-core CPU, this car stereo can greatly simplify your operation which further impresses you a lot. A lot of practical functions supported are included, such as 3D GPS navigation, Bluetooth music, Backup camera, etc. While as for its function as a multimedia player, it can meet almost all your needs, including playing music, FM/AM stereo, video, TV programs, movies, etc. Therefore, if you like this 2002-2009 Toyota Prado Cruiser 120 Bluetooth Car Stereo, don’t forget to add it to your cart. Good luck to you!
Recent Comments