If you are unsatisfied with the single function of your factory radio, then it’s a great idea for you to upgrade it with an aftermarket head unit which can support a lot of new features. To help you easily upgrade, here I’d like to share a professional installation guide from Seicane specially for a 2000-2006 TOYOTA COROLLA EX head unit with you. If you own a 2000-2006 TOYOTA COROLLA EX , you can take it as a reference.

2000-2006 TOYOTA COROLLA EX head unit after installation

2000-2006 TOYOTA COROLLA EX head unit after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2000-2006 TOYOTA COROLLA EX head unit installation guide

1.Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2.Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3.Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4.Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5.Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6.Check all the accessories for the new Seicane car radio. Connect the harnesses to the back of the new Seicane car radio.

7.Connect the Seicane car radio to your original car radio ‘s plugs.

8.Put the new Seicane car radio into the dash.

9.Turn on the new Seicane car radio and have a comprehensive check if it works well.

10.Install 4 screws back to their original position.

11.Install the trim panel back to its original place.

In a word, you need to make clear about every step before you start to install this 2000-2006 TOYOTA COROLLA EX head unit in your car. If there is any question, you can seek help from your dealer. If you don’t have any experience on the installation, it’s strongly suggested you ask a professional to install your new unit. If you are still looking for a suitable head unit for your car, I’d like to recommend an excellent TOYOTA COROLLA EX head unit from Seicane to you. Please click for more details:

http://www.seicane.com/seicane-s126012-2000-2006-toyota-corolla-ex-android-gps-radio-car-audio-system-with-touch-screen-3g-wifi-dvd-player-bluetooth-obd2-mirror-link-steering-wheel-control-backup-camera-1080p

With this top 2000-2006 TOYOTA COROLLA EX head unit in your car, turn-by-turn directions, lane assist, voice guidance, 3D street views, intelligent route planning, and points of interest (POI) can be provided for you by its built-in navigation. Hands-free calls for safe driving and streaming from music are also supported via the bluetooth technology. With DVD/CD player and an AM/FM radio, an awesome media player can effortlessly play all of internet’s popular audio and video file formats, you can be sure to be entertained on your road trips. Just go and have a great time!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation