Retrofitting your car with an attractive head unit is really refreshing, isn’t it? It can not only improve your car interior environment, but also take your driving experience up a notch. A wide range of features really bring you great convenience and enjoyment. If you have interest in upgrading your factory radio, then you may need a detailed 2012 2013 2014 Subaru universal Forester car stereo installation guide. The following mainly introduce how to install a wonderful Seicane Subaru universal Forester car stereo in your car. If you also have the same dashboard, you can also take it as a reference.
2012 2013 2014 Subaru universal Forester car stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
2012 2013 2014 Subaru universal Forester car stereo installation guide
- Take out of the glove.
1.Take out of the glove
- Unplug the plug which connect the trim panel to the dash.
2-2 Unplug the plug which connect the trim panel to the dash
2-1.Unplug the plug which connect the trim panel to the dash
- Pry the a/v vent panel with a lever.
3. Pry the av vent panel with a lever
- Take the vent panel out of the dash.
4. Take the vent panel out of the dash
- Unplug all the connectors at the back of the vent panel.
5. Unplug all the connectors at the back of the vent panel
- Remove four screws holding the factory radio with a screwdriver.
6. Remove four screws holding the factory radio with a screwdriver
- Gently take the factory radio out of the dashboard.
7. Gently take the factory radio out of the dashboard
- Unplug the connectors at the back of the factory radio.
8. Unplug the connectors at the back of the factory radio
- Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.
- Put the new Seicane stereo into your dashboard, you should check whether your connections are correct, the new stereo is in right position, and you’d better have a tidy for the cables.
- Check whether the new Seicane stereo is working without problem.
- If there is no problem, firm removed screws and bolts that are put aside, then make trim panel back on your new Seicane stereo.
That’s all the instruction on how to install a new 2012 2013 2014 Subaru universal Forester car stereo in your car. Wish it can be helpful for you. You may encounter some problems during the whole process, you can ask your dealer or a professional for help. Besides, you need to make sure you have a fitting stereo in your car. If you haven’t had one yet, then I’ d like to recommend a popular 2012 2013 2014 Subaru universal Forester car stereo from Seicane to you, please click:
This intelligent Subaru universal Forester car stereo is designed with a large 7 inch 1024*600 multi-touch screen to simplify the operation and offer an ideal effect for you to watch your favorite movies on your vehicle.
You can utilize its built in bluetooth to wirelessly pair your enabled mobile phone to accept and receive hands-free calls and stream audio to keep safe and enjoyable. The GPS navigation system of high precision can provide lane assist, 3D street view, landmark display, route planning, voice prompts and turn-by-turn direction for you to find your way to a variety of locations.
Wish you have a wonderful time with this attractive Subaru universal Forester car stereo on all your trips! Good luck to you!
Recent Comments