To replace your factory radio with a new head unit not only helps you get access to a wide range of upgraded features but also makes your driving experience up a level. Therefore, as you can see, there is a trend that more and more car owners upgrade their factory radios with new head units on their own to improve their in-car environment. If you want to be one of them, what you need is a correct installation guide as well as some related experience. It doesn’t matter if you have no experience before. The following is the step-by-step installation instruction from Seicane for a 2003-2011 Audi A3 S3 gps head unit. If you have a same or similar dashboard, you can refer to it.
2003-2011 Audi A3 S3 gps head unit after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2003-2011 Audi A3 S3 gps head unit installation instruction
1.The original head unit.
The original head unit
2. Prepare four removing keys. (PC2-132, European Removal)
Prepare four removing keys
3. Insert four keys into the gap between the stereo and the dashboard. Put the key with the flat side facing the outside of the stereo, then have a push.
Insert four keys into the gap between the stereo and the dashboard. Put the key with the flat side facing the outside of the stereo, then have a push
4.Take out the original head unit.
Take out the original head unit
5.Unplug all the connector at the back of the original head unit.
Unplug all the connector at the back of the original head unit
6. Check all the accessories for the new Seicane head unit.
7. Connect the harnesses to the back of the new Seicane head unit.
8. Connect the Seicane head unit to your original stereo’s plugs.
9. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane head unit into the dash.
11. Put everything into their original place. All the installation is done.
After reading the above installation instruction for a 2003-2011 Audi A3 S3 gps head unit, can you finish the whole installation process on your own now? If you have any questions, you’re welcome to consult your dealer or seek help from someone experienced. If you still think it impossible for you to finish the whole installation process by yourself, you’d better go to a car stereo upgrade centre for installing your new head unit. If you haven’t had a suitable head unit, here I would like to recommend a 2003-2011 Audi A3 S3 gps head unit of high quality from Seicane. You may check the link for more details.
This advanced 2003-2011 Audi A3 S3 gps head unit, based on the latest Android 5.1.1 operation system and a powerful quad-core processor can replace your factory radio and be compatible with a lot of upgraded functions and new features. A wide range of features can provide you great convenience as well as enjoyment in your car, such as 3D GPS navigation system, Bluetooth technology, DVD/CD player, FM/AM radio, Rearview camera, USB &SD connection and so on. If you like it, just add it to cart and enjoy your driving with it in your car from now on!
Recent Comments