Tag Archives: 2008-2013 Subaru Impreza

2008-2013 Subaru Impreza gps Bluetooth car stereo after installation

Are you wondering how a technician helps you install a new car stereo in a car stereo upgrade centre? Actually, it is fairly easy for you to become a “technician” who can remove your factory radio and install a new one on your own. To finish all the installation steps can help you save a certain amount of money. which may save you a certain amount of money. If you own a 2008-2013 Subaru Impreza gps Bluetooth car stereo, you can take the following car stereo installation guide for it as a reference.

2008-2013 Subaru Impreza gps Bluetooth car stereo after installation

2008-2013 Subaru Impreza gps Bluetooth car stereo after installation

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2008-2013 Subaru Impreza car stereo installation guide

1. The original car stereo.

The original car stereo

The original car stereo

2. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2-1

2-1

3. Remove four screws that fixed the stereo on the dashboard.

Remove four screws that fixed the stereo on the dashboard

Remove four screws that fixed the stereo on the dashboard

4. Gently pull the factory radio out of the dash.

Gently pull the factory radio out of the dash

Gently pull the factory radio out of the dash

5. Then unplug the connectors at the back of the factory radio.

Then unplug the connectors at the back of the factory radio

Then unplug the connectors at the back of the factory radio

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

That’s all about the installation instructions for a 2008-2013 Subaru Impreza gps Bluetooth car stereo. Wish it can be helpful for you to install your new unit. If you have any questions, don’t hesitate to seek help from your dealer or a professional. If you still cannot overcome all the questions, you’d better directly ask a technician to help install the new car stereo. But one thing you cannot  absolutely ignore, that is, to check whether your new car stereo is compatible with your car. If you don’t have an ideal car stereo, please click the link below which is about a remarkable 2008-2013 Subaru Impreza gps Bluetooth car stereo from Seicane.

http://www.seicane.com/android-aftermarket-car-stereo-auoradio-gps-for-2008-2013-subaru-impreza-with-bluetooth-dvd-player-navigation-system-touch-screen-obd2-dvr-tv-1080p-video-3g-wifi-steering-wheel-control-usb-sd-backup-camera-mirror-link-s167068

Equipped with the latest Android 5.1.1 operating system as well as a Quad-core CPU, this 2008-2013 Subaru Impreza gps Bluetooth car stereo allows you to operate it more quickly and smoothly. Because of the powerful 3D GPS navigation system, you don’t have to be afraid of getting lost when you are in a unfamiliar place. You can be guided to anywhere you would like to go due to the functions like 3D street view, destination search, turn-by-turn directions, voice prompts, etc. Wish you love it!