Tag Archives: Gps Of Toyota verso

head unit after installation,dvd player of 2010 2011 2012 Toyota Verso

Head unit after installation,aftermarket radio gps of 2010 2011 2012 Toyota Verso

With rapid development of technology, economy is developing at a very amazing speed.People’s life standard is getting higher and higher. Cars have became an usual family transportation,thus people will try their best to make car settings more comfortable and convenient.

Roads become complex with the exploitation of land,therefore installing a precise GPS navigation system is very necessary,it benefits people not only to spend more vigor on thinking about where to go next but also safer.

There’s no doubt that we will pay more attention on 2010 2011 2012 Toyota Verso in dash radio gps  installation,which will be showed in the following part.

Precautions before installation:

1.Please check the appearance and the unit functions before install the unit

2.Please do not shorten the GPS antenna,it may lead to antenna problem

3.Please don’t make the GPS antenna winding the steering wheel and shift lever,it will be dangerous

2010 2011 2012 Toyota Verso original radio removal and radio gps installation:

1.Use a pty tool to lever the right and the left part and disconnect the cables

Use a pty tool to lever  the left part

Use a pty tool to lever the left part

Use a pty tool to lever  the right part

Use a pty tool to lever the right part

2.Take out two screws on both sides with a screwdriver and put them aside for usage once again

Take out two screws on both sides with a screwdriver

Take out two screws on both sides with a screwdriver

3,Remove dashboard of the head unit

Remove dashboard of the head unit

Remove dashboard of the head unit

4.Gently make the cables that connected with the dashboard disconnected

Gently make the cables that connected with the dashboard disconnected

Gently make the cables that connected with the dashboard disconnected

When you have finished these steps,you can have a look at this radio and see whether it’s same with the next image:

radio after dashboard removal

radio after dashboard removal

It’s not over yet.There are still 3 steps to achieve it.

5.remove screws beside the CD player and take out the CD player

6.connect the cables as the instructions said,install your new unit in it

7.fasten the screws in original places

It’s the basic installation steps for Toyota Verso radio gps. All the dvd players are mostly same and differs at little place,so it’s normal to find some difference and there will not be any large impact.

In order to make sure that you can mount the gps navigation system more precise and safer, I will give you some tips in the installation and usage of the unit.

1.Please don’t use strong chemicals, cleaners, strong detergent wash the machine

2.Please use a clean soft fabric wipe the screen,without using ordinary fabric

3.Please use the touch screen pen to operation unit, do not use other sharp objects, if not it will damage the screen

4.Please protect the original display when the staff is dismounting the original CD in order to use the original screw again

For more information or when you meet problems that can’t deal with,you can visit this website:http://www.seicane.com/2010-2011-2012-toyota-verso-in-car-autoradio-gps-system-bluetooth-music-am-fm-radio-cd-dvd-player-tv-tuner-3g-wifi-mp3-mp5-ipod-aux-dvr-1080p-steering-wheel-control-c133  , or ask people who worked directly for this market for help,trust that nothing will obstruct the work.