Is it hard to install a new car radio? Car owners who want to upgrade their factory radio often ask that. Actually, it’s not too complicated to install a new radio. If you have some related installation experience and a detailed installation guide, you can also easily finish the installation on your own. Here comes the professional 2005 2006 Dodge Viper radio instruction from Seicane for you as a reference if you are going to upgrade your radio.
2005 2006 Dodge Viper radio after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2005 2006 Dodge Viper radio installation guide
1.Remove the trim piece above cup holder with a lever.
1.Remove the trim piece above cup holder with a lever.
2.Remove 2 screws behind the trim piece.
2.Remove 2 screws behind the trim piece.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
4.Remove 4 screws which holds the factory radio in place.
4.Remove 4 screws which holds the factory radio in place.
5.Take out the factory radio.
5.Take out the factory radio.
6.Disconnect the smaller harness on the behind of the factory radio.
6-1.Disconnect the smaller harness on the behind of the factory radio.
6-2. Check all the accessories for the new Seicane car radio.
7.Connect the Seicane car radio to your original car radio ‘s plugs.
7. Connect the Seicane car radio to your original car radio ‘s plugs.
8.Connect the smaller harness at the back of the new radio.
9.Put the new Seicane radio back into the dash.
10.Install four screws and trim panel.
11.Install 2 screws behind the trim piece and the trim piece.
12.Turn on the new radio and have a comprehensive test.
13.Tidy up everything in your car, and all the installation is done.
That’s all the installation guide for a 2005 2006 Dodge Viper radio. It’s quite easy, isn’t it? But if you have any question, you can turn to your dealer for help. If it’s the first time for you to install a new radio, then you’d better have a professional to install your new radio.
On the other hand, do you have a suitable radio which can fit your car? If not, I’d like to recommend an ideal 2005 2006 Dodge Viper radio from Seicane to you. Here’s the link, please click for more details:
This amazing 2005 2006 Dodge Viper radio can support a number of audio and video formats, you can play almost all the DVDs, CDs, VCDs, Ipod, FM/AM radio, etc. to relax in your car. The latest GPS navigation system, bluetooth technology, wifi, 3g internet, USB and SD connection are all available for you to get the greatest convenience and enjoyment when you are outdoors.
Just facilitate your operation with this 800*400 digital LED multi-touch screen in this super Dodge Viper radio which can replace your factory radio without any gap. Good luck to you!
Recent Comments