Nowadays, more and more car owners would like to replace your factory radio with a brand new multifunctional car radio which comes with a wide range of practical and entertainment features to meet car owners’ needs in car. If you are one of them, you should find a correct installation guide to help you. The following is an installation guide for a 2014 2015 HONDA FIT car radio. If you also have the same or similar dashboard, you may refer to this guide.
2014 2015 HONDA FIT GPS Bluetooth Car Radio after installation
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2014 2015 HONDA FIT car radio installation guide
1. Remove the bottom panel with a plastic removal tool and then unplug the connector behind.
Remove the bottom panel with a plastic removal tool and then unplug the connector behind
2. Remove screws below the radio with a screwdriver.
Remove screws below the radio with a screwdriver
3. Remove the panel on the left of the radio.
Remove the panel on the left of the radio
4. Release the panel one the right side of the radio.
Release the panel one the right side of the radio
5. Take out the original radio, please use a plastic removal tool if necessary.
Take out the original radio, please use a plastic removal tool if necessary
6. Disconnect the connectors at the back of the radio.
Disconnect the connectors at the back of the radio
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original radio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Wish the above installation guide can do you some help. If you have doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. If you are afraid of making damage to either your car radio or your car, you can directly go to a car radio upgrade center and have the new car radio installed by the professional technician. To help you select a suitable car radio, here I would like to share an amazing 2014 2015 HONDA FIT car radio from Seicane with you. For more details, please click:
This amazing car radio is running on the latest and stable Android 7.1 operation system, a strong quad-core 1.6 GHz RK-PX3 CPU processor and 2GB RAM. So it will provide its users with much smoother and faster operation experience as well as improved performance.
When you turn on the GPS function, you can easily know your current locations and find the most suitable way to reach your desired destinations according to turn-by-turn directions and voice prompts. And with dual zone function, you can freely enjoy your favorite music under GPS mode which won’t have any negative influence on GPS function.
Through the connection between your Bluetooth-enabled mobile phone and this unit, you can freely get access to both Bluetooth hands-free phone calls as well as Bluetooth streaming music from your mobile phone.
Wish you like this unit and good luck to you.
Recent Comments