What do you think is the easiest and most effective way to upgrade your car’s capabilities? As far as I am concerned, the easiest and most effective way is to replace your factory radio with a new aftermarket car stereo? If you want to gat access to upgraded and new features, you need to remove your factory radio and install a new car stereo. To install a new car stereo, you can find a correct installation guide to help you. The following is an installation guide on a 2001-2008 TOYOTA RAV4 car stereo. Whether you are experienced or totally a green hand, you can take this installation guide as a reference if you have the same or similar dashboard.
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2001-2008 TOYOTA RAV4 car stereo installation guide
1. Remove two trim panels at each side of the center console and set it aside.
2. Remove the top panel and set it aside.
3. Remove 4 screws holding the unit with a Phillips screwdriver.
4. Gently take out the panel on the radio interface.
5. Take out the radio and disconnect cables at back of it.
6. Check all the accessories for the new Seicane car stereo.
7. Connect the harnesses to the back of the new Seicane car stereo.
8. Connect the Seicane car stereo to your original car radio’s plugs.
9. Put the new Seicane car stereo into the dash.
10. Turn on the new Seicane car stereo and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
Now do you have a general understanding of the installation process on a 2001-2008 TOYOTA RAV4 car stereo? If you don’t, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Besides, before the installation, it is very vital to check whether the new car stereo can fit your car well or not. If not, you can refer to an amazing 2001-2008 TOYOTA RAV4 car stereo from Seicane. For more details, please click:
This car stereo runs on the stable Android 6.0 operation system, a powerful 8 – Core 1.5 GHz RK-PX5 A53 processor and 32GB Inland Flash as well as 2GB RAM.
Even you are driving around a place you are totally unfamiliar with, you won’t get lost with this unit installed in your car. With the help of the high-accuracy 3D GPS navigation system, you are able to know your current locations and find the right way to arrive anywhere you would like to go according to turn-by-turn directions and voice prompts. Besides, you can also listen to music while you are navigating to your destinations.
What’s more, with the assistance of the wireless Bluetooth technology, you can make your Bluetooth-enabled mobile phone sync with this car stereo, thus, you can dial, answer, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your mobile phone with remaining your hands on the steering wheel and keep your eyes on the road ahead.
Just take this amazing car stereo at a competitive price right now! Good luck to you!
Recent Comments