If you would like to drive a car to travel around a city that you are unfamiliar with, you must need high precision GPS navigation function in your car. However, your factory radio may not be advanced enough to be compatible with worldwide real-time GPS navigation function. In that case, it is wise of you to replace your factory radio with a brand new multifunctional car radio for your beloved car. The following is a 2013 2014 2015 2016 BMW 5 Series F10/F11 NBT car radio installation instruction from Seicane which can be taken as your reference.
2013 2014 2015 2016 BMW 5 Series F10 F11 NBT car radio after installation
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2013 2014 2015 2016 BMW 5 Series F10/F11 NBT car radio installation instruction
1. The original car radio.
The original car radio
2. Use a plastic flat pry tool to pry the air vent panel.
Use a plastic flat pry tool to pry the air vent panel
3. Use a screwdriver to remove the screws that fix the original car radio panel.
Use a screwdriver to remove the screws that fix the original car radio panel
4. Remove the car radio panel and then disconnect the connectors at the back of it.
Remove the car radio panel and then disconnect the connectors at the back of it
5. If you need to remove the original car radio, then just remove these mounting screws and then remove the car radio. Then you should disconnect the connectors at the back of it.
If you need to remove the original car radio, then just remove these mounting screws and then remove the car radio. Then you should disconnect the connectors at the back of it
6. If you need to remove the screen, then just unscrew the two mounting screws and then remove the screen. And then unplug the connectors or cables at the back of it.
If you need to remove the screen, then just unscrew the two mounting screws and then remove the screen. And then unplug the connectors or cables at the back of it
6-1
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original radio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Above is the whole removal and installation process on a 2013 2014 2015 2016 BMW 5 Series F10/F11 NBT car radio. If you meet any problems, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio.
If you don’t know how to select an ideal car radio for your beloved car, here I would like to share a remarkable 2013 2014 2015 2016 BMW 5 Series F10/F11 NBT car radio from Seicane with you. For more details, please click:
With this car radio installed in your car, you can freely get access to a wide range of practical and entertainment features, therefore, almost all your different needs can be met in car thanks to this unit.
This unit comes with 3D GPS navigation function of high precision, so according to its turn-by-turn directions and voice prompts, you can easily locate where you are and navigate to any locations you would like to go to. Additionally, this unit also has dual zone function, so you can freely enjoy your favorite music while navigating and the music will automatically switch to GPS voice.
What’s more, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, without taking your hands off the steering wheel control for a long time, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music playlists. Thus, you will gain a lot of convenience and enjoyment.
What are you waiting for? If you like this unit, please don’t be hesitated to add this car radio to your shopping cart right now.
Recent Comments