If your factory radio cannot support a lot of entertainment options to meet your different needs, it is high time for you to consider removing the factory radio and installing the new aftermarket car radio. And if you are a car owner of a 2011-2015 KIA K2 RIO, and would like to make the car radio replacement on your own, you can refer to the following 2011-2015 KIA K2 RIO car radio installation instruction. Wish you can get some help from it.
2011-2015 KIA K2 RIO car radio after installation
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2011-2015 KIA K2 RIO car radio installation instruction
1. The original car radio.
The original car radio
2. Use a plastic removal tool to release the top panel.
Use a plastic removal tool to release the top panel
3. Pry the trim panel of the radio with a plastic knife and remove it.Unplug the connector at the back of it.
Pry the trim panel of the radio with a plastic knife and remove it.Unplug the connector at the back of it
3-1
4. Unscrew the screws that are holding the radio on the dashboard.
Unscrew the screws that are holding the radio on the dashboard
5. Take out the radio gently.
Take out the radio gently
6. Unplug the connectors and cables at the back of the radio.
Unplug the connectors and cables at the back of the radio
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original radio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
That’s the whole installation process of a 2011-2015 KIA K2 RIO car radio. One one hand, if you have any questions, you are welcomes to contact your dealer, communicate with someone experienced or turn to a professional for help. On the other hand, if you think it too hard for you to finish the whole installation process, you’d better arrange a professional technician to help you install it.
Anyway, before installation, please do carefully select an ideal car radio for your beloved car. If you have no ideas, you can refer to the following link which is a great 2011-2015 KIA K2 RIO car radio from Seicane.
This amazing car radio is upgraded to run on the stable Android 6.1 operation system and a powerful quad-core CPU processor, so you are able to have a much smoother, faster and easier operation experience.
With the assistance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system of high accuracy, you can make your Bluetooth-enabled mobile phone sync with this unit for hands-free phone calls and streaming music, which not only bring you the greatest convenience but also add enjoyment to your trip.
Additionally, this unit’s Bluetooth function enables you to get access to both Bluetooth hands-free phone calls and Bluetooth streaming music as long as you make your Bluetooth-enabled mobile phone connect with this car radio.
If you like this unit, don’t hesitate to add it to your shopping cart. Good luck to you!
Recent Comments